ASTM D92 Automatic Cleveland Open Cup Flash and Fire Point Tester Gd-3536D

• After-sales Service: Lifetime Technical Support
• Warranty: 2 Years
• Max Diameter of Workpiece: <500mm
• Mass Scope of Workpiece: <900kg
• Type: Cleveland Open Cup Flash Point Test
• Maxcapacity: <1000KN
• Model NO.: GD-3536D
• Accuracy Grade: 0.5
• Load Way: Electronic Load
• Loading Method: Dynamic Load
• Display: Digital
• Control: Computer Control
• Weight: 0-100Kg
• Power Source: AC220V
• Oil Cylinder Position: Under
• Power Supply: AC(220±10%)V, 50Hz.
• Heating Device: Quartz Tube Furnace Heating, No Naked Fire
• Test Flame Applicator: It Applies The Test Flame Automatically.
• Thermometer: (-6~400)&Ordm
• Igniting Device: 1.Ignition Source: Coal Gas 2.Lame Diameter Is 3.2
• Ambient Temperature: (-10-50)ºC
• Relative Humidity: ≤85%
• Maximum Power Consumption: 650W
• Transport Package: Wooden Case
• Specification: 350mm*290mm*350mm
• Trademark: GOLD
• Origin: China
• Production Capacity: 200units/Month

Product Description

ASTM D92 Automatic Cleveland Open Cup Flash and Fire Point Tester GD-3536D

 

Introduction: 

ASTM D92 Automatic Cleveland Open Cup Flash and Fire Point Tester is designed and manufactured in accordance with the requirements stipulated in the People's Republic of China standard GB/T 3536 "Determination of Flash Point and Fire Point of Petroleum Products (Cleveland Open Cup Method)".
It is suitable to determine the flash point and fire point of Cleaver open cup method according to the method specified in this standard, except fuel oil and petroleum products with an open flash point lower than 79ºC.

Application and Features:

• GD-3536D Automatic Cleveland Open Cup Flash and Fire Point Tester is widely used in railway, aviation, electric power, petroleum industries and universities, scientific research institutes, measurement and testing departments and other units to detect and test the flash point and fire point of petroleum products.
• This instrument adopts a color LCD large screen display, an all-English human-machine dialogue interface, and a logo-free keyboard. It has prompt menus and guided input functions for parameters such as pre-value temperature, sample label, atmospheric pressure, and test date.
• The simulation traces and displays the function curve of temperature rise and test time. It has an English misoperation software prompt modification function, and is equipped with a parameter prompt function such as test date and test time.
• Automatically correct the influence of atmospheric pressure on the test and calculate the correction value.
• Differential detection and automatic correction of system deviations.
• Scanning, detecting, and printing data are completed automatically, and the test arm automatically rises and falls.
• Electronic ignition, forced air cooling

Specifications:

Model	GD-3536A	GD-3536D	GD-261D
Reference standard	ASTM D92	ASTM D92	ASTM D93
Power supply	AC220V±10%,50Hz	AC220V±10%,50Hz	AC220V±10%,50Hz
Temperature range	Ambient temperature~400ºC	Ambient temperature~400ºC	Ambient temperature:(10~40)ºC
Ignition mode	Ignite once manually	Automatic	Electric ignition.
Communication port	No	Yes	Yes
Packaging dimension	55*47*40cm,16kg	72*53*45cm,29kg	51*32*33cm,20kg
Other functions	Automatic	Automatic  Commucation port to PC	Automatic
Features	Automatic model, automatically test, analyze and store&print test data; Room temp.~300 ºC;	Can test both flash point and fire point, room temp.~400ºC; Others are same to GD-3536A;	Bluetooth interface, 32-bit ARM processor and high-precision AD,8-inch IPS Screen

Precautions

1. The instrument should work under no crrosion environment.The oil cup should be cleaned when changing the test sample.

2. Press manual rising up and lowering down to adjust when the sample be heated to expansion and flash point detecting ring immersed into oil.Pay attention that the adjustment range should not be oversize. 

3. The flash point detecting ring should be kept clean.Operator can use the filter paper to clean the oil dirt so that to keep the detecting sensitivity of instrument.

4. When the instrument not in use,it should be putted in the environment which temperature is 10ºC~40ºC,relative humidity is under 80% and no etchant gas and harmful substance in the air.

5. If there is difference between operation manual and actual operation, take instrument as standard.

 

Warning:If there is any breakdown of the instrument,please shut down the power in time.The instrument can be used again only after it cooling down and be repaired by the professional to avoid any accident happen!

 

Workshop

 

Chongqing Gold Mechanical&Electrical Equipment Co.,Ltd is a professional manufacturer of Petroleum Products test kits

and electrical testing equipment in China.Our products are sold to most countries in the world and they are highly

popular because our good quality and after-sale service.

At present, there are more than 150 employees, of whom more than 70% are technical personnel with college degree or above.

With strong technical force and strong development, new products have been launched continuously.

 

Exhibition

 

We have developed sales channels in many countries such as UAE, Saudi Arabia, Iran, Malaysia, Thailand, Pakistan, India, Germany, Belgium, USA, Mexico, Kenya,

Nigeria, South Africa and other countries worldwide. And we have gained strong advantage and high reputation in international market.

After several years' development, our products have become high intelligent and wide coverage. 
And our company has become one of the leading manufacturer of petroleum testing instrument and electrical testing instrument.

 

Packing

Goods are packed in veneer case, which is firm and safe for oversea shipment.

Please feel FREE to contact us if you have any needs. And welcome to visit our OFFICIAL WEBSITE at:

 http://chinainstrument.en.made-in-china.com

If you want to know more information...

Please leave a message below and click " SEND "

Thanks for your time and attention!

 

CHONGQING GOLD MECHANICAL&ELECTRICAL EQUIPMENT CO.,LTD.

Contact:Zoey Zhou