BS 476-6 Fire Propagation Index Tester Fire Test to Building Material

• After-sales Service: Yes
• Warranty: 1 Year
• Model No.: Gd-BS476-6
• Product: Fire Propagation Index Tester
• Power Supply: 230 Volts AC 50Hz.10A
• Standard: BS476-6
• Model NO.: GD-BS476-6
• Pressure: 1kpa
• Weight: About 50kg
• Transport Package: Standard Wooden Case
• Specification: 400mm (W) X 500mm X (H) X 400mm (D)
• Trademark: GOLD
• Origin: China
• HS Code: 9031809090
• Production Capacity: 500 Sets/ Year

Product Description

BS 476-6 Fire Propagation Index Tester 

Introduction:
The BS 476-6 Fire Spread Index Tester was developed in accordance with the BS 476-6 test method. The BS 476-6 method is used to compare the contribution of various materials to the formation of fire, and is mainly used to assess the fire performance of wall and ceiling linings. The results of the determination are expressed as flame spread index. Many UK and Hong Kong building materials or building products must be tested to BS 476-6 Flame Spread Index. BS476-6 flame spread index test can also be used for BS6853 test and British building materials Class 0 test. BS 476-6 fire spread index tester is suitable for indoor wall materials, insulation materials and ceiling materials. Such as glass, steel plate, LED display, etc., to measure the flame spread index.

Features:   

1. Stainless steel support frame and Calcium silicate board combustion chamber.

2. Three kinds of sample holders for different thicknesses of the specimens.

3. Low reflective black finished mild steel Chimney and Cowl assembly complete with thermocouple mounting points.

4. Compliant stainless steel gas burner.

5. Two K-type minerals insulated thermocouples complete with ceramic insulators.

6. Two pencil-type heaters with 1000w installed in the combustion chamber.

7. Control gas instrumentation including electronic gas on/off valve, flow regulating valve, flow meter, and manometer.

8. Intelligent single-phase power controller with a feedback loop for accurate control of electric heating elements

9. DAQ records automatically the mV output from the thermocouples of the flue gases throughout the duration of the test.

10. According to the test time, automatically adjust the output power.

Data Acquisition system:

1. Prompted software interface

2. Data recording and display of cowl temperature against time

3. Data recording and display of ambient temperature against time

4. Display of power value in kW

5. Calibration routine

6. Calculation of output rise and calibration value

Specification:   

Product name	BS 476-6 Fire Propagation Index Tester
Standard	BS 476-6
Electrical	230 volts Nominal 10 Amps
Ambient Temperature	Operating 10°C to 35°C
Gas Supplies	The gas supply specified in the Standard is Standard test gas G112, as specified in BS 4947.
Flow	Gas flow for burner adjustable from 0 to 5 nl/min.
Pressure	1kPa
Apparatus Dimensions	400mm (W) x 600mm x (H) x 300mm (D)
Control module	400mm (W) x 500mm x (H) x 400mm (D)
Weight	about 50kg
Standard	BS 476-6---Fire test to Building Material - Fire Propagation

BS 476-6 Fire Propagation Index Tester

Software

 Fire Propagation Index Tester for Building Materials