| Customization: | Available |
|---|---|
| After-sales Service: | 2 Years |
| Warranty: | 2 Years |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
A semi-automatic flash point tester is an instrument that requires manual intervention in some operations during the flash point testing process, combined with automatic control functions, to determine the lowest temperature at which a liquid can be ignited when its vapor is mixed with air under specific conditions
Our pensky-martens closed cup flash point tester is designed and manufactured as per standards GB/T 261-2008 Determination of Flash Point - Pensky-Martens closed cup method and ASTM D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester. It is used to make determination of the closed cup flash point of the petroleum products.
The sample temperature is gradually increased through a heating system. When it reaches or approaches the flash point temperature, an ignition device is used to generate a fire source, causing the sample vapor to burn. At the same time, the detection system monitors whether a flame is generated. Once a flame is detected, the corresponding temperature is the flash point.
1. Single chip micrºComputer control technique.LCD screen displays.English man-machine interaction interface.The heating power is continuously step-less adjustable.The rate of heating up is exact.Easy setting for parameters.
2. The LCD screen has prompting menu,prompting input operation interface.It shows the setted parameters, real-time temperatures and other test parameters.Press the "record"button when the flash point appears.The screen will show and reserve the flash point.
3. The structure is newly design and small.Stainless steel table-board looks clean and beautiful.It can be used as long as equipped with gas or other civilian fuels.It is easy to use and test results exact.
| 1 | Power supply | AC( 220±10% )V, 50Hz |
| 2 | Heating device | (1)The furnace is silicon carbide material. Power is 600W |
| (2)The heating power is adjustable from 0 W to 600W | ||
| 3 | Heating rate | Procedure A: (5~6)ºC/min, Procedure B:(1~1.6)ºC/min |
| Automatically controlled | ||
| 4 | Stirring device | (1)Stirring motor: BYGH101 stepping motor |
| (2)Driving mode: flexible shaft | ||
| (3)Shaft size: 8mm*40mm | ||
| 5 | Stirring rate | Procedure A: (90~120)RPM, Procedure B: (250±10)RPM |
| 6 | Igniting device | (1)Igniting source: gas (or other civilian fuels, the same below) |
| (2)Electric ignition. Gas flame diameter:3.2mm~4.8mm | ||
| 7 | Temperature testing probe | RTD, PT100 |
| 8 | Ambient temperature | ≤ 35ºC |
| 9 | Relative humidity | ≤ 85% |
| 10 | Maximum power consumption | 650W |
){kind=link}