| Customization: | Available |
|---|---|
| After-sales Service: | All Life Technical Supports |
| Warranty: | 12 Months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Mining Cable Flame Resistant Apparatus MT 386
Introduction:
In the past 20 years of practice, mining cables have experienced an innovation from non-flame retardant to flame retardant, especially in the test methods and determination rules for the flame retardancy of mining flame retardant cables (MT 818-2009, MT 386- 2011), the flame retardant performance of mining cables has been effectively controlled and improved.
The mining cable load flame resistant apparatus is manufactured according to the standard MT 386-1995 "Test Methods and Determination Rules for the Flame Retardancy of Coal Mine Flame Retardant Cables" and is used to test the combustion of MT 818-2009 "Coal Mine Cables" under overload conditions and designed and manufactured based on characteristics. The outer shell of the test chamber is made of stainless steel plate, with beautiful color and high fastness. The upper and lower structure of the test chamber and electrical control system facilitate operation—suitable for flame retardant tests on coal mine flame retardant cables, flame retardant cable joints, etc. Under high current operation, when the cable core reaches 204°C, a flame of a certain intensity and a certain time is applied to the cable to determine the cable sheath and insulation. The equipment is developed based on the flame retardancy and high-temperature resistance of the material in this state.
Standard:
* MT 386-2011 Test methods and determination rules for the flame retardant performance of coal mine cables,
* GB/T 3836.1-2000 Electrical equipment for explosive gas environments Part 1: General requirements
* MT 818-2009 Industry standard for coal mine cables
Feature:
Structural feature:
1. The box body is made of sheet metal spray paint, which is beautiful and corrosion-resistant; it has a large transparent observation window.
2. The internal tooling fixtures are all made of SUS304 stainless steel, which is beautiful and corrosion-resistant.
3. Overall size: 1800*600*1870mm; greater than 0.5m³.
4. The brass burner has an inner diameter of ¢9.5±0.5mm, is about 102mm long, and has an air adjustment hole.
5. The height of the blowtorch is adjustable, and the angle of the blowtorch is 90°.
6. The combustion box is equipped with an exhaust device and a smoke exhaust port; the smoke will be discharged after the experiment is completed; (customers must provide their own exhaust ducts).
7. Equipped with a blowtorch lever, the blowtorch can be pushed and pulled freely.
Combustion system:
1. Electronic high-voltage automatic ignition; automatic control of gas shutoff.
2. Flame height: adjustable.
3. Needle valve imported from Japan, accurately controls gas flow and flame height. The inner flame height is 75±5mm and the outer extension is 125±10mm.
4. Imported brand pressure gauges and pressure regulating valves accurately control gas pressure.
5. The blowtorch imported from the United States can accurately control the flame height and combustion heat.
6. The blowtorch can be freely evacuated from the sample burning area.
Electrical control system:
1. When the system evacuates the blowtorch, it automatically cuts off the current passing through the test piece.
2. Manually control load switching.
3. Test time reminder device; reminds the experimenter to evacuate the blowtorch when burning for 1 minute.
4. Load current: 10~3000A. (Note: When testing the largest cable of 300 square millimeters stipulated in the standard, only a single core can be tested) The current can be set manually by the handle.
5. Temperature measurement range: K-type thermocouple 0~1300ºC; thermometer equipped with thermocouple, temperature accuracy ±0.1ºC; accuracy level 1.
6. All parameters are digitally displayed.
Timer range: 0~9999s (standard requirement is 4min). When the temperature reaches 204ºC, a prompt will be issued and the gas will be automatically cut off to extinguish the flame.
Specification:
| Product Name | Mining Cable Flame Resistant Apparatus MT 386 |
| Working voltage | AC 220V and 380V±10%, 50Hz |
| Weight | About 300kg |
| Ambient temperature for use | -15~45ºC; relative humidity: (30~80)%RH |
| Gas | Methane gas content ≥ 95% or more; provided by the customer |
Our Services:
*Consulting support.
*Sample testing support.
*Factory Visiting
*Training support
*Installation support
*24 Hours &7 days service
){kind=link}