ASTM D36 Automatic Asphalt Softening Point Tester Ring-and-Ball Apparatus

• After-sales Service: Lifetime Technical Support
• Warranty: 2 Year
• Max Diameter of Workpiece: <500mm
• Mass Scope of Workpiece: <900kg
• Type: Automatic Asphalt Softening Point Tester
• Maxcapacity: <1000KN
• Model NO.: GD-2806H
• Accuracy Grade: 0.5
• Load Way: Electronic Load
• Loading Method: Dynamic Load
• Display: Digital
• Control: Manual Control
• Weight: 0-100Kg
• Power Source: AC220V
• Oil Cylinder Position: Under
• ASTM D36: Softening Point Ring and Ball Apparatus
• Softening Point Apparatus: Softening Point of Bitumen Ring-and-Ball Apparatus
• Softening Point Tester: Automatic Softening Point Apparatus
• Ring and Ball Apparatus: Automatic Softening Point Ring and Ball Apparatus
• Test Samples: 2 or 4 Samples
• Total Power Consumption: Not More Than 700 W
• Relative Humidity: Not More Than 85%
• Beaker Cubage: 1000 Ml
• Interface: RS-232c Interface
• Heating Power: 600 W
• Transport Package: Wooden Case with Good Quality
• Specification: 400mm*300mm*490mm
• Trademark: GOLD
• Origin: Chongqing of China
• HS Code: 9031809090
• Production Capacity: 200PCS/Month

Product Description

ASTM D36 Automatic Asphalt Softening Point Tester Ring-and-Ball Apparatus

Product Description

* The Automatic Asphalt Softening Point Tester is designed and made as  ASTM D36 Standard Test Method for Softening of Bitumen (Ring-and-Ball Apparatus).

* The Automatic Asphalt Softening Point Tester is used  to determine softening point of petroleum asphalt, coal pitch, liquid petroleum asphalt, and various of asphalts. It can be widely used for asphalt manufacturing companies, highway and bridge construction companies, relative colleges and universities, and scientific research institutes.

*It adopts computer controlling technology, automatic laser detection, LCD and micro-printer, and has the characteristics of linear heating temperature, uniform stirring speed, simultaneous four samples determination, and automatic softening point detection, so it is an automatic, convenient, reliable and intelligent instrument for softening point determination. It is the best choice of asphalt manufacturing companies, highway and bridge construction companies, college and universities, and scientific institutes.

(1)Printer: It is used to print out test data.
(2)Beaker: It is a square quartz beaker. It holds bath liquid and it is used for test.
(3)Heater:Heating part is on the bottom of the water bath.
(4) LCD: It is used to show information and test data during measurement.
(5)Sensor part: It is made up of laser emitter tube.
(6)Temperature sensor:Pt 100.
(7)Middle board: It is placed with samples and steel balls.The sample number is sample 1,2 ,3,4 from right to left.
(8)Receiving sensor part:It is made up of laser receiving sensor tube.
 

 

Main technical features

1. The Automatic Asphalt Softening Point Tester adopts microcomputer to control the test. Automatically stir, linear heating, automatically get the result and automatically print the test result.
2. The beaker adopts high temperature resisting glass material. The sizes of steel ring and ball can meet test standards.
3. Small desktop structure. LCD display. Ligh touch panel. It can determine four samples at a time. Easy to use and results reliable.
Softening point test bath liquid medium selection

Range	Liquid medium	Memo
<35ºC (higher than 0ºC)	Distilled water and glycol 1+1 mixture	Softening point range 0ºC~35ºC,select 1:1 distilled water and glycol mixture as the medium.
0ºC~35ºC	The mixture of Water and Glycerin 1+1(volume ratio)
35ºC~80ºC	Distilled water or deionized water	The boiled water cooled to 5ºC~27ºC.
80ºC~150ºC	Glycerin	The water content of reused glycerin will be increased and influence the test results.If the any appearance change of glycerin, pls change new one.
>150ºC	Silicone oil(50cSt viscosity)	If the any appearance change of silicone oil,pls change new one.Don't use any silicone oil with gelatin,which means degradation.

Product Parameters

1. Power supply: AC 220V (-5%~+10%), 50 Hz;
2. Measurement range:
(1) Heating medium: distilled water(softening point under 80 ºC) +5 ºC~+80ºC
(2) Heating medium: glycerin (softening point over 80 ºC) 32 ºC~160 ºC.
3. Temperature resolution: 0.1 ºC
4. Cubage of beaker: 1000 ml
5. Stirrer: the stirring speed can be adjusted continuously.
6. Heating rate: it will be adjusted to 5.0±0.5 ºC/ min automatically after three minutes
7. Heating power: 600 W
8. Test result: LCD screen shows results and printer to print.
9. Ambient temperature: The temperature shall be lower than 35 ºC and keep stable. There shall not be any airflow.
10. Relative humidity: ≤85%
11. Maximum power consumption: 700 W
12. Test samples: 2 or 4 samples
13.Computer port: RS-232C communication port
14.Outline dimension: 400mm×300mm×490mm(L*W*H)

Detailed Photos

Contact us

If you are interested in our ASTM D36 Automatic Asphalt Softening Point Tester Ring-and-Ball Apparatus or have any questions, please feel free to contact us.