| Customization: | Available |
|---|---|
| After-sales Service: | Lifetime Technical Support |
| Warranty: | 2 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1. Flash point is the lowest liquid temperature at which a test flame causes sample vapors to fire. Fire point is the temperature at which the test flame causes the sample to ignition and remain burning for ≥5 seconds.
2. This Automated Pensky-Martens Closed-Cup Apparatus is designed and manufactured as per standards GB/T 261-2008 Determination of Flash Point - Pensky-Martens closed cup method and ASTM D93 Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester. The Pensky Marten Flash Point Apparatus is used to make determination of the closed cup flash point of the petroleum products.
(1) Gas input (2) Communication port (3) Power socket (4) Stirring rate adjustment of procedure B (5)Stirring rate adjustment of procedure A1. The Automated Pensky-Martens Closed-Cup Apparatus adopts LCD screen to display. Full English man-machine dialog interface. It can preset the parameters of expected flash point,sample mark number, atmospheric pressure, test date,etc.It has menu to prompt and input function of guide type.
2. The Automated Pensky-Martens Closed-Cup Apparatus adopts simulation tracking display the function curve of temperature rising and test time.It has prompt functions of English mis-operation,test date and test time.
3. It is equipped with standard RS-323,485 computer port.The lower computer can save 100 groups of historical data. The test data can be saved for a long time, transmitted and modified if the instrument being connected with computer.
4. It can correct the influence of atmospheric pressure and calculate the correction automatically.
5. Differential detection.Automatically correct the systematic deviation.
6. Automatically open the lid,fire,detect and print test data.The test arm lifting up and down automatically.
7. The pensky martens closed cup tester adopts electric ignition to fire light the gas flame.It will light only need to press the button.
8. Humanized design,beautiful and safe. Easy to operate.
| Item | Breakdowns | Solutions | Remarks |
| 1 | The LCD screen shows nothing after power on. | 1. Check the connection of power line . 2. Open the side plate of instrument to check whether there exist looseness of plugs. |
|
| 2 | The repeatability errors of determinations are big. | 1. Check whether the test environment can meet the requirements. 2. Check the showing temperature of screen and recalibrate when needed. 3. Clean the oil dirt on the deteting ring to keep the detecting sensitivity. |
|
| 3 | 1) No heating 2) Can not fire the igniting mouth. |
1. Check the heating furnace.Replace it if being broken. 2. Check the gas circuit to make sure there is no stoppage and gas source be adjusted well. |
|
| 4 | The test arm cannot rise up or lower down. | Check whether the screw of electric machine and test arm is dropped. |
1. Power supply:AC(220±10%)V,50Hz
2. Flash point determination:Range: Ambient to 300ºC; Accuracy:0.1ºC
3. Heating rate:Procedure A: (5~6)ºC/min, Procedure B: (1~1.5)ºC/min; Automatic control and manually adjustable.
4. Stirring rate:Procedure A: (90~120)RPM, Procedure B: (250±10)RPM; Automatic control and manually adjustable.
5. Igniting mode:Electric ignition. Gas flame diameter:3.2mm~4.8mm
6. Working condition:Ambient temperature:(10~40)ºC; Relative humidity:≤80%
7. Maximum power consumption:500W
8. Dimension: 520mm*360mm*310mm
Automated Pensky-Martens Closed-Cup Apparatus for ASTM D93 Flash Point Test
| Pre-sales consulting | We promise to provide you professional consulting for any of your laboratory needs. We will help you select the most suitable instruments according to your requirement. We also offer free sample testing service before you placing order. |
| Order processing | We promise a rapid delivery time to you after we receive your order to make sure the instruments can be delivered to your laboratory at the fastest. You can contact us at any time to get an update of your production and logistics information. |
| After-sales service | We promise to give you a prompt response(with 24 hours) to any questions. We provide you a free training in our factory. We also provide chargeable onsite training according to your order value. The guarantee period of our products is 18 months. All of our products are lifetime maintained. |
If you are interested in our Automated Pensky-Martens Closed-Cup Apparatus for ASTM D93 Flash Point Test product or have any questions, please feel free to contact us.
){kind=link}