| Customization: | Available |
|---|---|
| After-sales Service: | Online and Offline Support |
| Warranty: | 2 Years |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1. The Ductility Testing Machine adopts external BRH high-assembly linear slide rail system, humanized design concept, no screw rod, guide rail or other devices in the test tank, the sample installation is very convenient, the maximum tensile length is 1.5 meters.
2. Novel transmission design, it adopts the 86BYGH250 series drive motor and HM405 driver, the whole stretching process is smooth and synchronous, the speed is uniform, no jitter, and the ductility display is accurate.
3. Three sets of test molds for ductility testing are provided. The trial mold is made of copper material, and its specifications and dimensions meet the standard requirements.
4. After stretching, it can automatically return to the test mode and locate accurately.
5. It adopts HPD-6219 high-precision digital display thermostat, film panel, touch key control, waterproof, durable, easy to clean.
1. Working power supply: AC220V (-5% ~ + 10%), 50Hz.
2. Measuring range: 1.5m (± 10mm).
3. Heating form: Electric heater heating.
4. Heating power: 3000W.
5. Bath circulation: Strong magnetic circulation pump circulates bath.
6. Temperature control range: 5 ºC ~ 49 ºC adjustable, digital display, temperature display resolution 0.01 ºC.
7. Temperature control accuracy: ± 0.1 ºC.
8. Stretching speed: 10 mm / min and 50mm / min.
9. Measurement accuracy: ± 1mm.
12. Ambient temperature: -10 ºC ~ + 35 ºC.
13. Relative humidity: ≤85%.
14. Dimensions:2365mm × 520mm × 1000mm.
15. Overall power consumption: no more than 4100W.
Two Clips- There are two holes in the clips. These holes are used to fix the mold in the testing machine. One clip is attached to the fixed end while the other is to the moving end.
The ductility test of bitumen is carried out in two steps
Sample Preparation: In this step, the bitumen sample is filled in the briquette mould after melting it.
Testing of the Specimen: In this step, the bitumen sample taken in the mould is tested for its ductility in the ductility testing machine.* Ductility test of bitumen (at beginning) sample in the Briquette* Ductility test ( At the yield point)* Ductility test of Bitumen (on the stage of failure)
1. If stretching the module shaft, it does not move, please turn off the power supply, avoid the danger. Please check the stretching switch, press button, motor connect wire, and confirm all of them are OK, and then start the tester again.
2. If the temperature display is not stable, please do as following steps:
Please check the sensor, if the resistance is about 100 Ω while the temperature is 0ºC. It is no problem.
Please check the sensor connect wire, and all of them are ok, please send the controller back factory and repaired.
3. If the water bath temperature is not up to the precision ±0.5ºC, please do as following steps:
At first to check the water circulation system, pump, and then the water, if the water is not clean and with impurity, please change it..
Second to check the filtering net for temperature senor, keep it with flow water.
4. If the pump runs in trouble, please stop it, to check the filtering net, and then clean it.
5. If the voltage of power supply is below than 210 V, the system will be destroyed, so please keep the power supply stable and in standard voltage.
6. If the tester will be not in service long time, please pour the water out completely, and take the pipe out, let the water and air in pump out.
| Pre-sale Service | 1.The professional sales team will reply to the inquiry in real time; | |
| 2.Customize suitable solutions according to the needs of different customers; | ||
| 3.Provide product technical parameters/operation manuals and evaluation reports, etc.; | ||
| After-sale Service | 1.From the date of purchase within one year instrument, is a product quality problem free repair replacement, lifetime supply of maintenance and technical services. | |
| 2.Technical Support |
(1)Our technical team supports our customers at all time with our long experience, expert advice and the unlimited spirit and always be for providing the best customer service. | |
| (2)Training how to install the machine,you can arrange your engineer to our company to get free training. | ||
| (3)If necessary, we can also arrange our engineer to your company for training and commissioning at your cost. | ||
| 3.The instrument has found anomalies or malfunctions please contact us to arrange the most convenient treatment options. | ||
Welcome to visit our Asphalt Equipment Ductility Testing Machine of Bituminous Materials for Bituminous Surfaces website,if you need any help, please contact with the customer service.
Welcome to visit us!
){kind=link}