IEC 60332 Single Cable Burning Tester Wire Vertical Flame Spread Testing Equipment

• Customization: Available
• After-sales Service: All Life Technical Supports
• Warranty: 12months
• Model NO.: GD-IEC60332
• Reference Standards: Gbt18380/IEC6032
• Model Number: Gd18380A
• Size: 600(W)*450(D)*1250(H)mm
• Power: AC220 V +/- 10V 50Hz
• Weight: 60kg
• Burner Angle: 45 / 0 Degree
• Falme Height: 170mm-190mm
• Inner Flame: 50mm-60mm
• Transport Package: Plywood Case
• Trademark: GOLD
• Origin: Chongqing China(Mainland)
• HS Code: 9031809090
• Production Capacity: 10

Product Description

 

Single Cable Burning Tester Wire Vertical Flame Spread Testing Equipment

Introduction:
Single Cable Burning Tester Wire Vertical Flame Spread Testing Equipment is the most widely used and low cost of cable fire performance test equipment; Single Cable Burning Tester Wire Vertical Flame Spread Testing Equipment meet the national standard GB /T18380.11-2008 / IEC60332-1-1: 2004 requirement.

Single Cable Burning Tester Wire Vertical Flame Spread Testing Equipment is to test cable, flame-retardant insulation layer under fire conditions applicable for testing wire and cable in overheating, overcurrent and another non-normal state.

Single Cable Burning Tester Wire Vertical Flame Spread Testing Equipment can be used in vertical or fibre optic wire and cable flame spread test, while test under fire conditions Dettol matter combustion conditions.

International standards:

IEC 60332-1-1,2,3
EN 50086-1-1994
GBT 18380.11,12-2008 

Features:

1, The touch screen intelligent control system; English user interface;

2, The system automatic ignition, automatic timing, automatic data storage;

3, The test section and the control section are combined design in one box for operation;

4, Stainless steel test box, the internal cavity size: height 1200mm, width 300mm, depth of 450mm;

6, A pre-mixed burner, an inner diameter of ¢ 12 ± 0.5mm, and a length is 100mm. 1KW hybrid standard burner, which provides an accurate test fire source;

7, The flame burning applied time and hold time can range from 0 to 99 minutes99 seconds range adjustment. Automatic control of the testing process;

8, Import needle valve precisely adjust the flame height, according to standards, then the blue flame height is 50mm ~ 60mm, total height 170mm ~ 190mm;

9, The gas flow rate is controlled by a needle valve;

10, Equipped with a stainless flame height caliper.

Specification:

Product name	Single Cable Burning Tester Wire Vertical Flame Spread Testing Equipment
Size	600(W)×450(D)×1250(H)mm
Gas pressure	0.1MPa
Power	AC220 V +/- 10V 50HZ;
Weight	60KG
Model	GD18380A
Gas purity	Propane> 95%; compressed air