Fire Testing Heat Release Tester Cone Calorimeter Heat Release Tester for Building Materials

• Customization: Available
• After-sales Service: Yes
• Warranty: One Year
• Model NO.: GD-ISO5660
• Mass Scope of Workpiece: <900kg
• Type: Material Testing Machine
• Maxcapacity: <1000KN
• Accuracy Grade: 0.5
• Load Way: Electronic Load
• Loading Method: Dynamic Load
• Display: Needle
• Control: Computer Control
• Weight: 100-500Kg
• Power Source: AC220V
• Oil Cylinder Position: Na
• Model No.: Gd-ISO5660
• Item Name: ISO5660 Cone Calorimeter
• Conical Heater: 5000 W, Output 0~100 Kw/M2
• Application Field: Building Materials, Rail, Imo, Wire & Cable, Other
• Working Gas: Compressed Air
• Reference Standards: ISO5660, ASTM E1354
• Calibration Gas: Gas Feed Unit ABB Brand PLC Brand
• Power Supply: 220 V AC, 50/60 Hz, 30 a
• MOQ: 1 Set
• Transport Package: Standard Wooden Case
• Specification: 1, 800 mm(W)*900 mm(D)*2, 650 mm(H)
• Trademark: GOLD
• Origin: China
• HS Code: 903180909
• Production Capacity: 10 Units Per Month

Product Description

ISO 5660 Reaction To Fire Cone Calorimeter to Test Heat Release Rates Fire Testing Equipment

Cone Calorimeter:
Cone calorimeter is one of the most important test instruments for studying the combustion performance of materials.
The cone calorimeter is based on the principle of oxygen consumption, which is used to measure the heat release rate of materials. The so-called oxygen consumption principle is: when the material is burned, the heat released by each unit of oxygen consumed is basically the same, and the measured value is 13.1MJ/kg±5%.

Standard:
ASTM American Society for Testing and Materials: ASTM D6113, ASTM E1354, ASTM E1740, ASTM F1550, ASTM E1474
EN European Standards:CSN EN 13501-1; CSN EN 45545-2
GB Chinese standard: GB 8624;GB/T 16172:2007
ISO International Organization for Standardization: ISO 5660
IMO International Maritime Organization: IMO MSC 40(64)
NFPA National Fire Protection Association: NFPA 271, NFPA 264
BS British Standards Institution: BS 476-15

Product Description:

Structural Features	1. The cone calorimeter adopts a cabinet design method, and the analysis cabinet can be moved, which can be used not only for the test of the cone calorimeter, but also for the connection of large-scale heat release rate test systems such as single combustion test equipment, solid room fire And cable combustion classification detection, in line with ISO 5660, ASTM E1354, GB/T16172 and other test standards; 2. Integrated test body and 19-inch analysis cabinet, embedded with a PC-type 15-inch industrial touch screen computer, used for the entire control and test process; 3. The rated power of the conical heater is 5000W, and the heat output is 0-100kW/m2. It is controlled by a PID temperature controller, and the radiation cone can be placed horizontally or vertically; 4. The sample box can hold samples up to 100mm x 100mm x 50mm; 5. Sample weighing range 0~2000g; accuracy: 0.1g (different ranges and accuracy can also be provided according to customer requirements); 6. Humidity alarm unit, when the moisture in the sample gas is too high, it can automatically alarm and communicate through the test software; 7. Flow alarm unit, when the smoke and dust in the sample gas are blocked, it can automatically alarm and prompt to replace the filter device.
Lgnition System	The ignition system is not less than 10KV high-voltage spark generator, which is automatically positioned by a rotating cylinder.
Exhaust System	The exhaust system is composed of fan, smoke collecting hood, exhaust pipe and orifice flowmeter, etc. The flow rate of the exhaust fan is adjustable from 0 to 50g/s, and the accuracy is 0.1g/s.
Gas Sampling System	1. The annular sampler is installed in the air intake pipe at a distance of 685 mm from the fume collecting hood, and there should be 12 small holes on the sampler to homogenize the gas flow components; 2. The temperature of the airflow is measured by a 1.6 mm diameter closed junction thermocouple, and the thermocouple should be installed 100 mm above the flow measuring orifice; 3. Integrated gas pretreatment system, including sampling pump, filter, condenser, peristaltic pump, moisture filter; condenser temperature: 0~5 degrees, diaphragm pump, flow rate: 3 l/min, pressure: 2.5bar .
Measuring System	1. Paramagnetic oxygen analyzer, range 0-25%, response time: 4 seconds, linear deviation: ≤0.5% FS, repeatability: ≤50 ppm O2, sensitivity drift: ≤ 0.1 vol.% O2/week or ≤ 1% measured value/week (non-cumulative), whichever is smaller, detection limit: ≤50 ppm O2; 2. Non-dispersive infrared CO and CO2 analyzer CO: 0~1%; CO2: 0~10%, measurement principle: infrared absorption, response time: 2.5 seconds, linear deviation: ≤1% FS, repeatability: ≤0.5% FS, zero drift: ≤1% FS/week, detection limit: ≤0.5% FS; 3. Smoke density analysis uses a laser system to measure smoke density. The system consists of photodiodes, helium-neon lasers, main detectors and auxiliary detectors; 4. Select SB type heat flow meter, the design range is 0~100k W/m, the accuracy of the heat flow meter is ±3%, the repeatability is ±0.5%, and a calibration report is attached; equipped with a portable water cooling system, when using the heat flow meter , the user does not need to connect an external tap water source and equip a water pipe.
Operating System	1. In order to calibrate the response of the entire test system, a methane calibration burner is used for calibration to measure the C-coefficient value; 2. The data acquisition system can automatically record the output of gas analyzers, orifice flow, thermocouples and other instruments; 3. Equipped with a software operating system, the test results include: heat release rate, flue gas flow rate, C coefficient, sample ignition time and extinguishment time, total oxygen consumption, total smoke generation, mass loss rate, total heat release, effective combustion Heat, carbon dioxide production and carbon monoxide production.

 

Test Result of ISO 5660 Cone Calorimeter:

• Heat Flux, Unit: kW/m2 

• Exhaust duct flow rate, Unit: l/s 

• C factor, Unit:1/kg.m.K

• Ignition time and Extinguisment time, Unit: s 

• Total oxygen consumption, Unit: g 

• Total Smoke Release, Unit: m/m2 

• Mass loss and Mass loss rate, Unit: g, g/s

• Heat release rate, Unit: MJ/kg, kw/m2 

• Effective heat of combustion, Unit: MJ/kg 

• Carbon monoxide yield, Unit: kg/kg 

• Carbon dioxide yield, Unit: kg/kg 

Specification:
Size: 1,800mm(W)×900mm(D)×2,650mm(H)
Weight: 350 kg

FAQ:
1.How does a cone calorimeter work?
In the experiment, we can load the sample on the load unit to measure the mass loss rate of the sample during the combustion process; heat the sample and ignite it through electric spark ignition to test its flammability and ignition time; collect the combustion gas in the attached pipe And in the exhaust hood, by collecting the changes of smoke pressure difference, gas concentration and temperature, the heat release rate and other indicators are automatically tested; using optical devices, the performance parameters of the smoke density can be measured; at the same time, through the acquisition of the above data, and then obtained Extended data such as effective combustion heat and specific extinction area.
2.How to install?
Power Requirements: 220 V, 50 Amps

Ambient temperature: 10°C to 35°C

Working gas: air compressor gas

Calibration gas: methane, nitrogen, CO2/CO mixed gas

3.What fields can be applied?
Construction materials, Rail Transit, Shipping Materials, Wires and Cables, Others
 

Product Show:

ISO 5660 Cone Calorimeter

ISO 5660 Cone Calorimeter Conical Heater

Cone Calorimeter Loading Platform

Cone Calorimeter Blower Details