| Customization: | Available |
|---|---|
| After-sales Service: | Lifetime Technical Support |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Carbon Residue Test Methods:
Micro method
The principle of the micro method is to put the weighed sample into a sample tube, and heat it to 500°C according to the specified temperature program under nitrogen. The volatile substances generated during the reaction are taken away by the nitrogen. , The carbonaceous residue left behind is reported as a trace carbon residue value as a percentage of the original sample.
The test conditions for measuring carbon residue by micro-method, the test environment is easier to control, the repeatability and reproducibility of the test results are very good, the sample amount is small, and it is more automated
Conradson method
When measuring by Conradson method, accurately weigh 10g ±0.5g of the test oil in the magnetic crucible of the instrument. After installing the instrument, heat it to high temperature with a blowtorch. Under the specified conditions, the test oil evaporates and decomposes, and the discharged steam is ignited with fire. After burning, it is heated intensely, and finally the weight of the residue is weighed. The result is the mass percentage of the test oil.
The Conradson method requires strict control of the heating time and heating intensity in the three stages of preheating period, combustion period and intense heating period. It is highly technical, the flame is difficult to control, and the data repeatability is not good.
Electric Furnace Method
An electric furnace is used instead of a gas blowtorch as the heat source. The sample is placed in a special pot with a capillary tube. The test oil is heated, evaporated and decomposed under the air-isolated and specified heating conditions. It is maintained for a specified time and the burnt black residue is measured. Expressed as mass percentage. Compared with the Conradson method, the electric furnace method for measuring residual carbon is simple to operate and easy to master.
Instrument structure
Technical Features:
1.Micro Carbon Residue Tester adopts all-in-one structure. It consists of two parts: electrical control chamber and high temperature heating furnace. The design is simple and reasonable.
2.It adopts single chip machine system. The instrument controls the whole procedures automatically according to program preset.
3.The screen adopts all English interface. Operator can do determination by prompts on the screen even no need to read the operation manual. Easy to operate.
4.It controls the flow rate of nitrogen, temperature heating rate and preset temperature automatically. Easy to adjust the flow rate. The heating rate is accurate and temperature control is stable.
5.ASTM D4530 Carbon Residue Tester collects test data and calculates results automatically. It can print and save the data according to customer's requirements.
Technical Specifications
| Power supply | AC(220±10%)V, 50Hz |
| Maximum power consumption | 1600W |
| Temperature of coke chamber | 500ºC |
| Temperature control accuracy | ±2ºC |
| Heating power | 1500W |
| Ambient temperature | 5ºC~35ºC |
| Relative humidity | ≤85%; |
| Dimension | 520mm×360mm×525mm |
Packaging List:
| No. | Product name | Unit | Quantity | Remark |
| 1 | GD-17144 Micro Carbon Residue Value Analyzer) | Set | 1 | |
| 2 | 12 Holes Tube Rack | PC | 1 | |
| 3 | Big sample tube(Dia.12×70mm) | PC | 24 | |
| 4 | Small sample tube(Dia.12×35mm) | PC | 24 | |
| 5 | Test Tube Hanger | PC | 1 | |
| 6 | Air manifold(Inner Dia. 6PU 2m) | Set | 1 | Connect steel cylinder and main unit |
| 7 | Discharge pipe(Inner Dia.10PU 2m) | Root | 1 | Discharge the smoke |
Workshop
Chongqing Gold Mechanical&Electrical Equipment Co., Ltd is a professional manufacturer of Petroleum Products test kits and electrical testing equipment in China. Our products are sold to most countries in the world and they are highly popular because of our good quality and after-sale service.
At present, there are more than 150 employees, of whom more than 70% are technical personnel with a college degree or above. With strong technical force and strong development, new products have been launched continuously.
Exhibition
We have developed sales channels in many countries such as the UAE, Saudi Arabia, Iran, Malaysia, Thailand, Pakistan,India, Germany, Belgium, the USA, Mexico, Kenya, Nigeria, South Africa, and other countries worldwide. And we have gained a strong advantage and high reputation in the international market.After several years' development, our products have become highly intelligent and wide coverage.
And our company has become one of the leading manufacturers of petroleum testing instrument and electrical testing instrument.
Packing
Please feel FREE to contact us if you have any needs. And welcome to visit our OFFICIAL WEBSITE at:
http://chinainstrument.en.made-in-china.com
){kind=link}