| Customization: | Available |
|---|---|
| After-sales Service: | All Life Technical Supports |
| Warranty: | 12 Months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
ISO 12127 Protective Clothing Contact Heat Transmission Test Apparatus
Introduction:
This contact heat transmission tester for fire protection clothing is designed and manufactured according to ISO12127-2007 and EN702.
Protective clothing contact heat transmission test apparatus uses the heating cylinder to provide a constant temperature while contacting with the sample under a certain load, and a calorimeter to measure the heat transfer properties. The instrument is easy to operate, the data is accurate and reliable, widely adopted in fire protective clothing companies and inspection departments.
Application:
Safety protection
Standard:
ISO 12127-2007
- Clothing for protection against heat and flame -- Determination of contact heat transmission through protective clothing or constituent materials
EN 702
- Protective clothing. Protection against heat and flame. Test method. Determination of the contact heat transmission through protective clothing or its materials
Specification:
1. This testing instrument consists of a control box and stainless steel test gantry.
2. The sample holder is automatic lifting, and the lifting speed is 5mm ± 0.2mm/s.
3. The K-type sheathed thermocouples, diameter 2mm, temperature measurement accuracy is 0.1 ºC.
4. Heating barrel temperature is higher than 500ºC, and the contact surface of the sample diameter is 25.2±0.05mm.
5. Barrel heating load weight 49N is adjustable.
6. Timer scope 0 to 99999s, timing accuracy up to 0.1s.
7. The calorimeter fixed disk diameter is 25mm, thickness 5mm, and assembled with a platinum resistance temperature sensor.
8. The support frame material is nylon 66, diameter of 40mm and a height of 50mm.
9. Specimen diameter should be 80mm.
10. PLC and touch screen for an intelligent control system.
11. PID intelligent temperature control system automatically collects temperature data.
12. Test data is automatically calculated and stored by the system, the test result can be printed freely.
13. Test table size: 650mm x 350 mm x 650mm.
14. Power supply 220V 50 / 60Hz, power 800w, can be customized.
15. Weight: about 50 kg
16. Ambient Temperature: Operating25±5ºC
17. Gas Supplies requirement: Propane and air compressed air
Our Company:
Since 2008, Chongqing Gold Mechanical & Electrical Equipment Co., Ltd. has developed 70 kinds of fire testing instruments and served for many industries such as building materials, aviation, rails, IMO, wire & cable, safety protection, and so on.
Our mission is to provide reliable products to our customers to meet their requirements of testing, R&D, and quality control. In addition, Gold insists on high-quality standards in niche markets and targets to minimize the gap between Chinese local products and imported products.
We work with trust, honesty, and a sense of responsibility, so quality and service are always our advantages over all competitors.
){kind=link}