| Customization: | Available |
|---|---|
| After-sales Service: | Technical Support,Online Service |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Introduction:
Solar photovoltaic materials, also known as solar panel (Solar pane) materials, are an indispensable application unit of solar photovoltaic power generation, and their role is to realize the collection of sunlight and heat through the assembly parts of several solar cell modules assembled on a board in a certain way, so as to achieve the purpose of converting into electrical energy.
Standards:
UL 1730: Smoke detector monitors for self-contained living units in multifamily dwellings and hotel/motel rooms: motorized annunciators detect residential soot conditions;
UL 790: Standard Test Method for Fire Testing of Roof Coverings;
IEC 61730-2 Photovoltaic Modules Appendix A Fire Test Flame propagation;
ASTM F 108 - 04 : Standard Test Method for Fire Testing of Roof Coverings;
Installation requirements of Solar Cell or Photovoltaic Modules Test Machine
| Electrical | AC 380V 3-Phase, 50/60Hz, 50A |
| Dimensions | About 6,000 (w) *2,200 (d) *2,000 (h) mm |
| Weight | 850KG |
| Exhuast | Minimum 400 m2/min |
| Auxiliary | Propane gas/liquefied natural gas, Compressed air, Vacuum cleaners, Computer |
Characteristics:
Structures:
1, Plywood roof covering materials, dimensions: 1,300 (w) X1,000 (d) x120 (h), to install the test sample;
2, Non-combustibility test Board, installed at the end of testing, can stop the test panels tempered;
3, Stainless steel fan control board, the test angle can be adjusted, size: 1,440 (l) x 940 (h) mm;
4, Used to support the testing of the main frame bracket, corrosion-resistant steel, dimensions: 1,020 (l) x 1,000 (d) x 1,473 (h) mm;
5, Non-combustible plate Assembly, installed in front of the frame to simulate the eaves and cornice, extension of the flame from the burner to the specimen, dimensions: 330 (w) x 2,130 (d) x 584 (h) mm; 6,Air flow rate for the test panel: 19 ± 8 km/h (5.5M/sec), and configure the anemometer monitor;
7, Separate ventilation pipes, can be extracted from outside the laboratory air;
8, Honeycomb filter is installed in the air duct, installed gas inlet guide vane;
9, Ventilation ducts equipped with slope adjustment panel for adjusting the air flow direction;
10, Ventilation pipes attached to the Guide, can enhance speed to ensure supply test airflow from the outside interference, guide plates made of stainless steel, location does not change with the wind pressure;
11, Duct materials for stainless steel, corrosion-resistant and heat-resistant, size: 2,130 (w) x 762 (h) x 3,000 (l) mm;
12, Fan 220V,50HZ, three-phase power, is equipped with a reverse system can automatically adjust wind speed, minimum flow for 300m3/min;
13, Infinitely variable speed inverter, 0-100% adjustable;
14, Gas burners (for intermittent Shi Huo, flame spreadandflying fire), 1.12m, 60.3mm, moving in the test side has a 12.7mm (w) *0.91m (long) slit;
15,Gasburner can provide a 22,000Btu/min (387kWh), and according to a, b, c three combustion levels, high-precision gas control valve controlling gas flow,
16, Top burner thermocouple is installed 58.7mm, 888 ± can test 28 ºC;
17, Automatic ignition system, ensure the security of test performance, ignition electrode 1.8kVp mass flow controller is the minimum pressure according to different standards, control gas flow rates, Class A and B:21,000 ~ 22,000 Btu/min (369 ~ 387 kWh) for 10 minutes, Class C:18,000 ~ 19,000 Btu/min (316 ~ 334 kWh) 4 minutes;
18, Temperature control system-Class A and B:760±28ºC (1400±50ºF)-21,000 ~ 22,000 Btu/min-Class C:704±28 c (1300±50ºF)-18,000 ~ 19,000 Btu/min
19, High precision pressure gauges and pressure regulating valve controls the gas pressure;
1)-Each transfer to gas in the burners need to follow a different test and control methods;
2)-LNG: using MFM can accurately measure flow (flow control valve control);
3)-LPG: air flow rate using the inverter system: the test deck at 19 ± 8 km/h (5.5M/sec);
20, Metallic mesh support materials, pallets can be rotated, so that full combustion of materials;
Test section:
1.Computer control system of United States special control software for Labview experiment, integration 10.2 "LCDscree;
2.Data acquisition systems, LabView programming language is used to program, data acquisition cards United States NI offers
3.Data acquisition system consists of the following parts:
1) 16-bit thermocouple input module
2) 16 bit a/d conversion input module
3) Data input/output module
4) 12 bit a/d conversion output module
5) 4 and 8-slot backplane
6) Labview modules
7) Labview/Ethernet network module
4.Brand testing systems, gas burners, the flame engulfed the burning material, the gas burner is 880±10ºC temperature can be adjusted;Packaging & Shipping:
|
Packing Details |
Wooden case for UL 790 UL 1730 IEC 61730-2 roof material and photovoltaic cell modules test apparatus ASTM E 108-04 |
|
Ports |
Shanghai, Guangzhou, Shenzhen, etc |
|
Lead Time |
30 Business Days |
After-sales service :
1. We guarantee that the goods fully comply with the quality, specifications and performance requirements stipulated in the contract;
2. Before delivery, we will conduct accurate and comprehensive testing of the products; Packing according to your requirements, pictures are attached before shipment for your confirmation, delivery is made on schedule, and professional shipping documents are provided;
3. We will provide you with quality service immediately, reply within 24 hours after receiving the quality message, and provide appropriate solutions within 3 working days;
4. After acceptance, our engineers will provide professional and technical services free of charge, such as video guidance and teaching, and on-site guidance and teaching if necessary;
5. We provide a 12-month warranty period, and in the event of quality problems during the product warranty period (not caused by human factors), we guarantee to provide free repair, maintenance and replacement of damaged and defective parts services;In the event of any technical failure outside the warranty period, we will provide free telephone consultation services, and can also carry out paid repair and maintenance services;
){kind=link}