ISO 5659 ASTM E 662 Plastic Smoke Density Measuring Instrument Nbs Smoke Density Tester

• Customization: Available
• After-sales Service: Technical Support,Online Service
• Warranty: 1 Year
• Model NO.: GD-ISO 5659
• Standard: ISO 5659, ASTM E 662
• Size: 1,600(W) * 820(D) * 2,150(H)
• Power: 220 V AC, 60 Hz, 15 a
• Weight: 350 Kg
• Manual: Supplied
• Exhaust: 50 L/S
• Utilities: Compressed Air, Propane Gas, Personal Computer, Du
• Packing: Wooden Packing
• Transport Package: Standard Wooden Case
• Trademark: Gold
• Origin: China
• Production Capacity: 100set/Month

Product Description

Product Description:

Best Price ISO 5659 ASTM E 662 Plastic Smoke Density Measuring Instrument NBS Smoke Density Tester

The NBS smoke density test box test method is derived from the National Institute of Standards and Technology (NIST) of the United States (the predecessor of NBS). It has been promoted and applied in many testing fields. This test method can be used to detect the smoke density level of plastic products, rail transit non-metallic materials, ship non-metallic materials, wire and cable products, etc.According to this test method, the generally applicable standards are ASTM E662, ISO 5659-2 and the NES 711 smoke density test method in the national standard. Compared with the previous building material smoke density tester method, this test standard has more accurate test results. At the same time, the optical sensor uses a more precise photomultiplier tube, which can capture subtle changes in smoke content in the box. If other test devices are selected, such as the Dräger gas detection tube, aviation standard smoke toxicity tests can be performed, and when connected with the FTIR Fourier transform infrared device, qualitative and quantitative analysis of smoke content can be completed

 

Main features:

1. The internal dimensions of the smoke density box test chamber are: 914mm
2. The box adopts a full-door design, which allows users to clean the inside of the test box more easily. When replacing different standard test accessories, the efficiency can also be greatly increased;
3. Install an auxiliary heating device on the outer wall of the test box to set the temperature inside the box according to different standard requirements;
4. An explosion-proof aluminum foil device is installed in the box, which can reduce the personal risk of testers in the event of an accident;
5. There is a pressure relief port on the top of the box, which is connected to the pressure regulating volumetric bottle to adjust the internal pressure of the box;
6. The top and bottom of the box are equipped with automatically moving cylinders for inhaling and discharging smoke;
7. Equipped with ASTM E662 radiation furnace device, which can provide 25KW/M2 heat radiation output;
8. Equipped with ASTM E662 standard six-head burner, which can be used with a radiant furnace to conduct flaming combustion tests;
9. An air-cooled copper plate calorimeter is provided, and the back cooling method can be used to adjust the surface temperature during testing;
10. Equipped with ISO 5659-2/GB/T8323 radiation cone device, which can provide 50KW/M2 thermal radiation output;
11. Provide ISO 5659-2/GB/T8323 standard open flame burner, which can be used with radiant cone to conduct flame combustion test;
12. Provide SB water-cooled heat flow meter, which comes with a standard measurement certificate;
13. It can be equipped with a self-circulating cooling water source, eliminating the need for an external cooling water source, making it easy for users to use;
14. Equipped with a weighing device, which can carry out MOD smoke density test and thermal weight loss test of materials;
15. The sensor range is 0-2000g and the accuracy is 0.1g;
16. Equipped with NES 711 open flame burner and stirring fan;
17. The switching between the radiant furnace and the radiant cone is connected by aviation connectors. Users only need to plug and unplug to complete the replacement between different standard test devices;
18. An optical cassette is installed on the top of the box, and the light source is a side window photomultiplier tube with S-4 frequency response and a light transmittance accuracy of up to 0.0001%;
19. It can automatically switch to three gears: Clear, Filter and Dark according to changes in smoke density;
20. The ND2 neutral expansion filter is installed in the cassette, which not only facilitates user self-calibration, but also can automatically switch gears during testing;
21. The lower part of the box is an incandescent light source, which can provide uniform light spot output;
22. The smoke density test box is an integrated design and is equipped with a touch screen computer. Users can use the test software and the entire process is set and controlled by the computer;
23. It has its own printer device. After the test is completed, the user can print the test report according to the test software.
 

Main specification:

name	NBS Plastic Smoke Density Testing Machine
standard	ASTM E 662,ISO 5659
Size	1,600(w) × 820(D) × 2,150(H)
Power	220 V AC, 60 Hz, 15 A
Weight	350 kg
Exhaust	50 l/s
Utilities	Compressed Air, Propane Gas, Personal Computer, Dust Collector

Packaging & Shipping:

shipping	wooden case for ISO 5659 NBS Plastic Smoke Density Testing Machine
port	shanghai,shenzhen,gangdong
delivery	≤15 work days

Company Information:

 

Our Service :
Pre-sale Service:

• Inquiry will be replied within 24 hours. 
• Welcome to visit our factory. 
• Technical datas and operation manual sent for evaluation.

After-sale Service:

• Training how to instal the machine, training how to use the machine at our factory;
• Engineers available to service machinery overseas at customers' cost;