Double Stage High Vacuum Transformer Oil Purifier

• After-sales Service: Lifetime Technical Support,Online Service
• Warranty: 1 Year
• Flow: 1800/3000/6000/9000/12000 L/H
• Power Supply: 380V 50Hz 3p (Customizable)
• Working Pressure: ≤0.5MPa
• Power(W): 4.1~188kw
• Model NO.: ZJA
• Dimension: Accoring to Diffrent Type
• Weight: 120~2200kg
• Filtration Accuracy: ≤1-3um
• Breakdown Voltage: 70-75kv
• Water Content: 3-5ppm
• Transport Package: Standard Wooden Case
• Specification: 120~2200KG
• Trademark: GOLD
• Origin: China
• HS Code: 9030849000
• Production Capacity: 1000set/Month

Product Description

Double Stage High Vacuum Transformer Oil Purifier

 

Introduction

The oil filter is a filtering device that removes mechanical impurities, oxidation by-products and moisture in impure oil by technical methods such as gravity, centrifugation, pressure, vacuum distillation, and mass transfer.

 

Specifications:

Parameters	Unit	1.8KY	3KY	6KY	9KY	12KY	18KY
Flow Rate	L/H	1800	3000	6000	9000	12000	18000
Working Vacuity	Pa	≤80	≤80	≤80	≤80	≤80	≤80
Working Pressure	Mpa	≤0.5	≤0.5	≤0.5	≤0.5	≤0.5	≤0.5
Temperature Range	ºC	45-65	45-65	45-65	45-65	45-65	45-65
Power Supply		50Hz	380V	3 Phase	4-Wire	or as request
Total Power	KW	16	36	70	100	150	200
Inlet/Outlet Diameter	mm	20/20	25/25	32/32	40/40	50/50	65/65
Length	mm	1600	1800	2200	2500	2800	3450
Width	mm	1250	1450	1600	1950	2150	2600
Height	mm	2000	2200	2450	2700	3000	3000
Weight	Kg	500	700	1460	1800	2400	4000

Index of oil after purifying:

Breakdown Voltage	KV	70-75
Water Content	ppm	3~5
Gas Content	%	≤0.2
Filtering Accuracy	µm	1~3

 

Feature:

1. One pot has two-stage vacuum isolation space with different pressures to maintain oil circuit balance betweenthe two stages.
2. Vacuum pumps imported from Europe are at the leading level in the world, and high air pump speeds ensure ahigh working vacuum.
3. New technology for vacuum separation using special spinning discs and stainless steel machines with dewatering and air pumps
4. The use of new heating equipment can reduce heat generation and extend oil life.
5. The oil level control uses a photoelectric method, and the main components are imported from Switzerland.
6. Customers can choose equipment equipped with all or part of imported components.
7. It is equipped with a filter assembly imported from Italy.
8. All pumps must be hermetically sealed at our factory and must be noise-free and leak-free when  operating, extend oil life.