ASTM D 1230 Fire Resistance 45 Degree Combustion Rate Tester

• Customization: Available
• After-sales Service: Yes
• Warranty: 1 Year
• Model NO.: GD-2819
• Transport Package: Plywood Case
• Trademark: Gold
• Origin: China
• HS Code: 9031809090
• Production Capacity: 100 Sets/Month

Product Description

 

ASTM D 1230 fire resistance 45 Degree Combustion Rate Tester

 

Introduction:
ASTM D 1230 fire resistance 45 Degree Combustion Rate Tester is manufactured under the flammable fabric code of the United States and is a mandatory testing requirement of the consumer product safety commission.This product is mainly used for testing the flame retardant performance of textiles, and according to its combustion performance, the products are properly classified, preventing any dangerous textile clothing from being used, so as to reduce any dangerous life.Its product testing scope is mainly for taking textiles, toy fabrics, soft furniture fabrics and so on.

Standard:
• KS F 2819 : Testing Method For Incombustibility Of Thin Materials    (Testing Method for incombustibility of thin materials for construction) 
• ASTM D 1230 Canadian Minimum Flammability Standards for most fabrics 
• NFPA 702 Forced edge ignition of fabrics cited by California for Hospital Apparel and Bedding Fabrics 
• CA TB 117 (2000) Upholstery Fabrics (Section E) Synthetic Filling (Section C) 
• BIFMA Upholstery material screening test
•ASTM D 1230 fire resistance 45 Degree Combustion Rate Tester

Features:
Chamber shall be made in Stainless Steel. Door shall be equipped with clear plastic panel. 
Some combustible gaseous materials respond with or are absorbed in the wall of Chamber. Constituents of Chamber shall have minimal level of these materials. If transparency is required, Polypropylene including Polycarbonate shall be applied. 
Grade 1 (below 5 Cm, no residual flame) 
Grade 2 (below 10 Cm, residual flame remains just within 5 seconds) 
Power Switch to supply or block power 
After Flame Time: Counter displaying After Glow time 
After Glow Time: Counter displaying After Flame time 
Flame Spread time: Set time that a specimen catches fire (Flame Spread time) 
Start Switch for starting test 
Reset Switch to set Counter to "0" 
Burner Selection Switch for displaying whether Air Mix Burner or Micro / Meckel Burner is selected 
Selection Switch to check size of fire and features of specimen in Calibration Mode and convert into Test Mode for performing test 
Pressure Gauge displaying pressure 
After Flame Stop Switch for stopping After Glow time 
After Glow Stop Switch for stopping After Flame time 
Control Valve for adjusting pressure of Air Mix Burner 
Control Valve for adjusting flame of Micro / Meckel Burner 

Specification:
Size	730 (w) × 250 (D) × 900 (H)
Power	220 V AC, 60 Hz, 10 A
Weight	50 kg
Utilities	LPG

Test Result:
• Specimen name and conditions 
• Incombustibility type, pre-treatment method and heating time of test object 
• Char length, residual flame, residual dust, and remarkable observations in terms of fire-retardant performance 
• Test date, test laboratory, and test manager name