| Product Name: | Bunched Cable Vertical Flame Spread Tester |
|---|---|
| Standard: | UL1685, IEC 60332-3-10, En 50399 |
| Power: | Electronic |
| Application: | Wire & Cable |
| Overseas Training: | Available |
| System: | Computer Control |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier EN 50399 Bunched Cable Vertical Flame Spread Tester
Introduction:
EN 50399 Bunched Cable Vertical Flame Spread Tester is used for bundle cable or fiber optic cable to detect vertically mounted under specified conditions for vertical flame spread inhibiting the ability of the instrument.
When given a certain amount of housing supply of gas and the use of standard ignition source of ignition, this instrument can be used to test for vertical flame vertical diffusion to electric cables and wires of state.
In addition, if the tester burner adjustment of 20 degrees can be achieved by IEEE 383 (IEEE 1202) testing standards. Equipment can be equipped with heat release instrument configure the port, with the gas analyzer can measure the thermal power values such as HRR (heat release rate), SPR (smoke generation rate) and so on.
Application:
Wire & Cable
Standard:
1. IEC 60332-3-10:2000: Tests on electric cables under fire conditions Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus.
2. IEC 60332-3-21~25:2000: Tests on electric and optical fibre cables under fire conditions.
3. EN 50399: Common test methods for cables under fire conditions - Heat release and smoke production measurement on cables during flame spread test - Test Apparatus, procedures, results.
Case Features:
1, Stainless steel test box the size of 1,000 ± 100 (W) x 2,000 ± 100 (D) x 4,000 ± 100 (H)mm. Interior surface of the case than the high ground, and the rear side covered with insulation material.
2, With a standard stainless steel ladder, based on ladders GB / T18380.31 requirements.
3, Alternate sample frame 2.
4, Ladders made of stainless steel; corrosion-resistant; easy to clean.
5, In the lower part of the cabinet, from a position in front of the housing 150 ± 10mm has an 800 ± 20 (W) × 400 ±10 (D) of the air intake.
6, The inside of the box is mounted thermocouple type K thermocouples, 2mm in diameter.
7, The airflow inside the combustion furnace can be stably controlled at (5000 ± 500) L / min.
Control system:
1, PLC with large-screen touch screen control system.
2, Automatic ignition system, automatic timing; Timing range 999min, accuracy 1s.
3, Experimental data is automatically stored, free inquiry.
4, 40 minutes, 1hour timekeeping reminders.
5, The specimen mounts with electric crane lift.
Device parameters:
1, The test box the size of 1,000 ± 100 (W) x 2,000 ± 100 (D) x 4,000 ± 100 (H) mm.
2, Anemometer accuracy 0.1m / s.
3, The air source anemometer range 8000L / min; outlet winds (5000 ± 500) L / min can be adjusted.
4, Gas: 95% purity of technical grade propane (customer).
5, The gas flow control: Under 100kpa, 20ºC conditions.
6, The combustion air supply: Propane (or LPG).
Detailed Images:
Specification:
| Size | 1,000mm(w) × 2,000mm(D) × 4,000mm(H) |
| Power | 220 V AC, 60 Hz, 10 A |
| Weight | About 500kg |
| Auxiliaries | Propane Gas Valve System, Ignition System |
Company Information
Chongqing Gold, which is dedicated in design, manufacture and service of Fire Testing Equipment.
Since 2009 Gold has developed 70 kinds of instruments and has helped many customers in China, USA, India, Singapore, Pakistan, Indonesia and European.
Major industries including Building materials, Aviation, Rails, IMO, Wire and Cable, Safety Protection, Automotive Interior and so on.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}