Thermal Radiation Dripping Test Machine Nfp92-501

• After-sales Service: All Life Technical Supports
• Warranty: 12 Months
• Item Name: Thermal Radiation Dripping Test Machine
• Standard: Nfp92-501
• Application: Rigid and Elastic Materials
• Radiator Rated Power: 500W
• Model NO.: GD-NFP92-501
• Power Meter Accuracy: 0.5
• Pressure Range: <0.1MPa
• Power: 220 V, 10 AMPS, 10A
• Transport Package: Standard Wooden Case
• Trademark: GOLD
• Origin: Chongqing China(Mainland)
• HS Code: 9031809090
• Production Capacity: 500 Sets/ Year

Product Description

Thermal Radiation Dripping Test Machine NFP92-501

 

 

Introduction: 

Thermal Radiation Flame Propagation Tester provides performance evaluation of rigid and elastic materials with thicknesses greater than 5 mm. The tester was developed according to the French building materials and railway vehicle flame retardant test standard NF P92-501. The principle of the test is to carry out 30KW/m2 heat radiation on the sample, which may cause the sample to volatilize the flammable gas and induce the combustion of the volatile gas. Colleagues observe the spread state of the flame and collect it through the combustion of the material. Evaluate the data for testing the exotherm. Suitable for radiation test methods for fire resistance performance of materials used in railway vehicles.

 

Standard:

 NFP92-501
 

Specification:

Product Name	Thermal Radiation Dripping Test Machine
Width	1600mm
Depth	650mm
Height	1450mm
Weight	78kg
Radiator rated power	500W
Power meter accuracy	0.5
Pressure range of gas regulating valve	<0.1MPa
Power	220 V, 10 Amps, 10A

 

Feature: 

1. Stainless steel test box, the inner wall is flame-resistant material, equipped with a transparent observation window.
2. Stainless steel tubular air inlet device with filter device to shield indoor pollution source.
3. 45-degree test stand with stainless steel indicator rule to calculate flame spread distance.
4. Thermal radiation device can provide 30KW/m2 thermal radiant flux.
5. The power controller controls the radiation output and can adjust the radiant flux of the heat radiation device.
6. The panel displays the operating power value of the thermal radiation device, eliminating frequent calibration procedures.
7. Changming small flame device, easy to ignite the upper and lower burners before the test.
8. Quarter rotary plug device, easy to cut off the burner and ignite the flame.
9. Upper and lower stainless steel burners that ignite volatile flammable gases.
10. Needle valve can control the upper and lower burner flame height, equipped with a flame height gauge.
11. Top and air inlet thermocouple monitor temperature, and display temperature difference value status in real-time.
12. Standard test software, which can automatically calculate the flame index, combustion index, etc.
13. Built-in test report, data can be output and printed.
14. The test data is: Flame generation index: I, Average flame height index: S, Longest flame index: H, Combustion heat generation index: C

Product images:

Our Services:

*Consulting support. 

*Sample testing support.

*Factory Visiting

*Training support

*Installation support

*24 Hours &7 days service