Needle Flame Tester for Plastics IEC 60695

• After-sales Service: All Life Technical Supports
• Warranty: 1 Year
• Product Name: Needle Flame Tester for Plastics
• Standard: IEC 60695-2-2; IEC 60695-11-5
• Application: IEC 60695 Needle Flame Tester for Plastics
• The Flame Height: 12mm
• Model NO.: GD-IEC60695
• Ignition Time: 0s ~ 999.9s Adjustable, Generally 30s
• Burning Time: 0s ~ 999.9s, Automatic Recording, Manual Pause
• Test Space: 0.5m3, Black Background
• Dimensions: L1120 * W520 * H1250mm
• Test Power Supply: 220V / AC, 50Hz
• Transport Package: Standard Wooden Case
• Trademark: GOLD
• Origin: China
• HS Code: 9031809090
• Production Capacity: 500 Sets/ Year

Product Description

Needle Flame Tester for Plastics IEC 60695

Introduction: 

IEC 60695 Needle Flame Tester for Plastics is in accordance with national standards GB4706.1-1998 to design and produce. The IEC 60695 Needle Flame Tester for Plastics applies for lighting, low-voltage electrical equipment, household appliances, electrical machines, motors, power tools, electronic equipment, electrical instruments, electrical connectors, accessories, and other electrical and electronic equipment and parts, component research, production and quality control departments and insulating materials, plastic or other solid combustible materials industry to carry on small-flaming ignition experiments.
 

Standard:

GB4706.1

GB5169.5-2008

IEC60695-2-2 

IEC60695-11-5 etc
 

Technical Parameters: 

1. Needle burner: stainless steel, an inner diameter of ¢ 0.5 ± 0.1mm, an outer diameter of not more than ¢ 0.9mm, length of 35mm more needles, no air access;
2. The burner angle: vertical (when adjusting and measuring the flame height) or inclined 45 ° (the test)
3. Combustion gases: 95% butane gas or propane gas;
4. Ignited bedding layer: white pine plank (thickness 10mm), surface covering 12 ~ 30g / m2 standard tissue paper layer is applied at lower flame from 200mm ± 5mm
5. Temperature range: 0--1000 ºC
6. The flame temperature requirements: from 100 ± 2 ºC ~ 700 ºC ± 3 ºC, should be completed within 23.5 ± 1.0s;
7. The flame height: 12mm ± 1mm;
8. Shi burning time: 0s ~ 999.9s adjustable, generally set at the 30s;
9. Holding burning time: 0s ~ 999.9s, automatic recording, manual pause;
10. Test Space: ≥0.5m3, black background, (can be customized cubic 0.75 m3 or 1 m3 according to customer requirements);
11. Temperature sensor: K-type insulation-sheathed thermocouple (Φ0.5mm)
12. Test program automatic control, independent ventilation system;
13. Dimensions:1120 (L)* 520(W) * 1250(H)mm, exhaust Φ100mm;
14. Test Power: 220V / AC, 50H.

Specification:

Product Name	Needle Flame Tester for Plastics IEC 60695
Material	Stainless steel
The combustion gases	The combustion gases
The burner angle	90° 45°
Subplate	white pine plank ( 10mm),  Surface covered by   standard silk paper  200mm ± 5mm below the flame
Temperature range	0--1000 ºC
The flame temperature requirements	100±2ºC~ 700ºC±3ºC
Heating rise time	23.5±1.0s
The flame height	12mm ± 1mm
Ignition time	0s ~ 999.9s adjustable, generally 30s
Dimensions	L1120 * W520 * H1250mm
The diameter of the exhaust	Φ100mm
Test power supply	220V / AC, 50Hz

Our Services:

*Consulting support

*Sample testing support

*Factory Visiting

*Training support

*Installation support

*24 Hours &7 days service