Flame Propagation Test for a Single Insulated Cable
Introduction:
The single vertical test device meets the standard IEC 60332-1~2, and is used to obtain and judge the ability parameters of the wire or cable to prevent the spread of flame under the laying condition. Select the fire supply time according to the specifications of the sample, and evaluate the experimental results according to the judgment requirements after the fire supply is completed.
Technical Parameters:
- SUS304 stainless steel control cabinet, fume hood and metal cover are intergrated. It is easy to operate and have a good appearance
- Metal Cover: 1200mm(H) * 300mm(W) * 450mm(D). The front is open, the top and bottom are sealed
- Blowtorch: nominal power: 1kw
- Control Mode: Touch screen control. The test combustion time can be set by the screen. The combustion time can be controlled and the temperature value can be displayed when the flame temperature is calibrated
- Burning Device: Automatic high voltage ignition
- Flowmeter: air flowmeter: 1.5 ~ 15L/min; gas flowmeter: 0.1~1L/min
- The separately controlled exhaust fan is installed at the top
- Flame detection device: one imported thermocouple of φ0.5, K type, one electrolytic copper billet φ9mm, one each weight is 10g ± 0.05g, a suit of temperature and time display device
Specifications:
- Overall Dimensions: 630mm(W) * 600mm(D) * 2170mm(H)
- Power Supply: AC 220V, 50/60Hz, 2A
- Air Source: propane and air (provided by customers)
Single Wire and Cable Vertical Burning Tester
Flame Propagation Test for Single Cable
Flame Propagation Test for a Single Insulated Cable
IEC60332 Cable and Wire Tester
Audited Supplier 
){kind=link}