ASTM D92 Manual Cleveland Open Flash Point Tester for Petroleum Analyzer

• After-sales Service: Lifetime Technical Support
• Warranty: 2 Year
• Ignition Mode: Igniting Once Manually
• Temperature Range: Ambient Temperature-400 Degree
• Test Flame Applicator: It Applies The Test Flame Automatically
• Temperature Display: Thermometer
• Model NO.: GD-3536
• Product Name: Manual Coc Flash Point Tester
• Application: Petroleum Analyzer
• Standard: ASTM D92
• Maximum Power Consumption: 650W
• Igniting Device: Coal Gas or Liquefied Petroleum Gas
• Flame Diameter: 0.7mm-0..8mm
• Transport Package: Well-Packed Standard Export Wooden Case Per Set
• Specification: 380*320*350mm
• Trademark: GOLD
• Origin: Made in China
• HS Code: 9031809090
• Production Capacity: 100sets/Year

Product Description

ASTM D92 Manual Cleveland Open Flash Point Tester for Petroleum Analyzer

Product Description

The use environment for the use of the tested sample of the opening flash point is an open environment (such as lubricating oil), and the opening flash point value of petroleum products is determined to be convenient and fast, which meets the standards of national standards, the United States, and the European Union. Widely used in railway, aviation, electricity, oil industry and scientific research departments. The opening flash point measurement is a new type of analysis instrument produced by advanced technology, which is mainly used to determine the flash point value of the oil product opening.

Test procedures interface

Product Parameters

Product name	Manual Type Cheap Price Cleveland Open Cup Flash Point Tester ASTM D92
Power supply	AC(220±10%)V, 50Hz
Heating device	Quartz tube furnace heating, no naked fire, explosion prevented. The power is adjustable from 0W to 600W
Test flame applicator	It applies the test flame automatically
Thermometer	(-6~400)ºC. It is the same as thermometer ASTM 11C
Igniting device	(1) Ignition source: coal gas or liquefied petroleum gas (2) Flame diameter is 0.7mm-0..8mm
Ambient temperature	(15~50)ºC
Relative humidity	≤85%
Maximum power consumption	650W
Dimension	380*3200*350mm (thermometer is not included)

 

Main technical features

<<< Difference between Open Cup Flash Point Tester and Closed Cup Flash Point Tester >>> 

Different experimental principles
1. Experimental principle of opening flash point: The principle of open flash point measurement is to install the sample into the test cup to the specified carvings. First increase the temperature of the sample, and then slowly heating. When it is close to the flash point, the constant speed is heating up. At the specified temperature interval, a small test flame passes the trial cup horizontally, and the minimum temperature of the steam on the surface of the liquid surface is used as the minimum temperature of the steam on the surface of the liquid surface as the measurement result of the opening flash point.
2. Experimental principles of closed flashes: When the concentration of oil and gas and air on the oil surface increases, the lowest temperature of the light fire flashing fire is called flash point.
 

<<< What are the Precautions of open cup flash point testing >>>

1. There are high fever in the oil cup and its nearby during the test process, and it is forbidden to touch!
2. Someone must be on duty during the test process
3. The instrument has a ignition device, operate in the ventilation kitchen (do not turn on the ventilator)
4. The temperature sensor is made of glass. Do not touch it with other items when using
5. There should be no other items interval between the opening cup and the heater
6. Do not press and lift it with your hands or other items during testing to avoid mechanical damage

Detailed Photos

Contact us

If you have any questions about this ASTM D92 Manual Cleveland Open Flash Point Tester for Petroleum Analyzer or the instruction, please contact us in time. We will serve you wholeheartedly!