ASTM D5453 Total Sulfur Content by Ultraviolet Fluorescence Sulfur-in-Oil Analyzer

• After-sales Service: Lifetime Technical Support
• Warranty: 1 Year
• Max Diameter of Workpiece: 500mm
• Mass Scope of Workpiece: <900kg
• Type: Petroleum Products Solidifying Point & Cold Filter
• Maxcapacity: <1000KN
• Model NO.: GD-5453
• Accuracy Grade: 0.5
• Load Way: Electronic Load
• Loading Method: Dynamic Load
• Display: Digital
• Control: Computer Control
• Weight: 0-100Kg
• Power Source: AC220V
• Oil Cylinder Position: Under
• Optional Parts: Solid Sample Injector, Gas Sample Injecto
• Sample Types: Solid, Gas and Liquid
• Method of Determination: Ultraviolet Fluorescence Method (S)
• Measuring Range: 0.1~10000mg/L
• Temperature Range: Room Temp~1300ºC
• Temperature-Controlled Precision: ±1ºC
• Sample Detection Time: About 2 Minutes
• Power Supply: AC220V±22V, 50Hz±0.5Hz, 1500 W
• Host Weight: 20kg
• Temp Controller Weight: 40kg
• Transport Package: Wooden Case
• Specification: Host: 305(W)*460(D)*440(H)mm
• Trademark: GOLD
• Origin: China
• Production Capacity: 200units/Month

Product Description

ASTM D5453 Total Sulfur Content by Ultraviolet Fluorescence Sulfur-in-Oil Analyzer 

Introduction: 
GD-5453 Total Sulfur Content Ultraviolet Fluorescence Sulfur-in-Oil Analyzer is to determine the total sulfur content by the ultraviolet fluorescence method. Improve the ability of anti-jamming, to avoid the complicated operation of titration pool and factors of instability which used Coulometry. So the sensitivity of the instrument is greatly improved. The key components of the system use imported components to protect the detector light leakage and steam leakage and lets the machine has a reliable guarantee. 

Standards:
SH/T 0689-2000, ASTM D 5453 -2006 , EN ISO 20846:2004 , GB 17930-2011, GB 19147-2009, ISO 20846-2011, BS EN 15486-2007 

System configuration:
Standard configuration: Printer+Computer+TS-3000+Liquid injector
Other optional parts: Solid injector, Gas injector

Easy to operate:
Based on Windows ( 7, XP, Me, 98 ) Chinese user interface to make the operation more convenient and fast.. You only need to click the mouse, and it can complete all of the parameter settings. The data collecting, processing, storage and printing controlled by computer.

Main technical parameter:
Basic parameters: Sample types: Solid, Gas and Liquid
Method of determination: Ultraviolet fluorescence method(S)
Sample injection quantity:solid:1-20mg; Liquid:5-50μL; Gas:1-5mLTemperature range: room temp~1150ºC
Temperature-controlled precision:±1ºC
Air supply requirements: High purity argon: above 99.9%,
                                             High purity oxygen: above 99.9% 
Power supply: AC220V±22V,50Hz±0.5Hz,1500 W
Size: Host:305(W)×460(D)×440(H)mm
Temp controller:550(W)×460(D)×440(H)mm
Weight:Host::20kg; Temp controller:40kg
Measuring range:0.1 ~10000mg/L(High concentration should be diluted, Low concentration gas sample is up to 0.1ppm)
Measuring accuracy:

Concentration values (ppm)	Injection quantity(µL)	RSD(%)
0.2	20	50
5	10	10
50	10	5
100	10	3
5000	10	3

Sulfur Content Tester Selection List:

Item	GD-380B Sulfur Content Tester	GD-4294C X-ray Fluorescence	GD-0689 Ultraviolet Fluorescence	GD-0253A Coulometric
Standards	ASTM D1266 Lamp method	ASTM D4294  X-ray Fluorescence (XRF)	ISO20846, ASTMD5453 ASTMD4629 ASTMD5762 ASTMD6069 Ultraviolet Fluorescence method	ASTM D3120, ASTM D3246
Application	Used to determine the sulfur content in light oils(such as gasoline,kerosene)which the Reid vapor pressure is not higher than 600mmHg	Used to detect diesel,naphath,kerosene, residual oil,lubricant base oil,hydraulic oil,jet fuel,crude oil,motor gasoline,and the sulfur content of other distillate hydrocarbon.	Suitable to determine the total sulfur content of liquid state hydrocarbon at boiling range 25-400°C and the viscosity 0.2-10mm2/s at room temperature.Used in total sulfur content range 1.0-8000mg/kg naphth,distillate oil,engine fuel and other oils	Suitable to determine the light petroleum products at the boiling range 40-310°C.The sulfur content range 0.5-1000ppm.If above 1000ppm sulfur contentsample,detecting it after attenuation.Not used in more than 10 times sulfur content of halogen content,more 10% total nitrogen content,heavy metal content more than 500ppm sample

Product details:

Workshop:
Chongqing Gold Mechanical&Electrical Equipment Co., Ltd is a professional manufacturer of Petroleum Products test kits and electrical testing equipment in China. Our products are sold to most countries in the world and they are highly popular because of our good quality and after-sale service.At present, there are more than 150 employees, of whom more than 70% are technical personnel with a college degree or above. With strong technical force and strong development, new products have been launched continuously.
Exhibition:
We have developed sales channels in many countries such as the UAE, Saudi Arabia, Iran, Malaysia, Thailand, Pakistan, India, Germany, Belgium, the USA, Mexico, Kenya, Nigeria, South Africa, and other countries worldwide. And we have gained a strong advantage and high reputation in the international market. After several years' development, our products have become highly intelligent and wide coverage.  And our company has become one of the leading manufacturers of petroleum testing instrument and electrical testing instrument.

Packing:

Goods are packed in veneer case or wooden case, which is firm and safe for overseas shipment.Please feel FREE to contact us if you have any needs. And welcome to visit our OFFICIAL WEBSITE at: http://chinainstrument.en.made-in-china.com