ASTM D4294 X-ray Fluorescence Sulfur Content Analyzer for Low Sulphur Fuel Oil

• After-sales Service: Lifetime Technical Support
• Warranty: Warranty Is 24 Months
• Weight: 13 Kg
• Rated Power: 30 W
• Oil Sample Quantity: 5 Ml
• Measurement Time: 60, 120, 240, 300, and 600 S at Random
• Model NO.: GD-17040
• Measurement Range: 7 Ppm to 5%
• Detection Limit: 7 Ppm
• Power Supply: AC (230-240)V, 60 Hz
• Ambient Temperature: 5~4 Degree
• Relative Humidity: <85%
• Calibration Curve Numbers: Save 9 Calibration Curves
• Transport Package: Well-Packed Standard Export Wooden Case Per Set
• Specification: 468*368*136mm
• Trademark: GOLD
• Origin: Made in China
• HS Code: 9031809090
• Production Capacity: 100 PCS / Month

Product Description

ASTM D4294 X-ray Fluorescence Sulfur Content Analyzer for Low Sulphur Fuel Oil

Product Description

Main unit and accessories

 Preparation before test

1. Please carefully read the Operation Manual before use.
2. Please carefully read the National Standard of People's Republic of China GB/T17040 and GB/T11140 to acquaint and familiar with preparation methods, operation procedures and test requirements.
3. Please get ready for all test apparatus and materials as per the requirements of relative standards.
4. Check working state of the instrument to make sure it is in accord with working environment and working condition stipulated in the Operation Manual.
5. Check outer shell of the instrument to make sure it is fine grounded.
6. The power supply of the instrument is AC 220V±5%, 50 Hz. The outer power supply wire should have fine grounding end.

 Flow chart of the software

Sample cell preparation and filling procedure
a. Then put a cell film on the center of the inner cell. See Fig.14 (b);
b. Press the outer cell on the inner cell with polymer film and press the outer cell to the bottom. See (c) and  (d);
c. Check the film. If it is tight and flat, the sample cell can be used.
d. Fill standard sulfur sample or sample to be determined into the main part of the sample cell. Then close the cover of the sample cell. Write serial number, date, sulfur content (S% (m/m)) of standard sulfur sample, and sulfur content (S% (m/m)) of sample to be determined on the cover of the sample cell. See (e). (f) ,Please make determination immediately after filling standard sulfur sample or sample to be determined into the sample cell to avoid sample leakage and evaporation.
 

Detailed Photos

Full set

No.	Name	Unit	Quantity	Remark
1	Main unit	Set	1
2	Sample cell (three parts)	Set	200
3	Sample cell film (6μm Mylar)	Piece	200	In two boxes
4	Leakage protection device (two parts)	Set	1
5	Printing paper (57 mm in width; Φ30mm)	Roll	3
6	Calibration sample (4 ml/piece)	Piece	11
7	Power supply wire (250V/3A)	Piece	1
8	3 ml Pipette	Piece	200

After Sales Service

Service
Device Problem Handling	Social media 24 hours online communication
	Mail Seamless Docking
	Video Conferencing

Contact us

If you have any questions about this ASTM D4294 X-ray Fluorescence Sulfur Content Analyzer for Low Sulphur Fuel Oil or the instruction, please contact us in time. We will serve you wholeheartedly!