ISO 9239 Flooring Radiant Panel Test Equipment for Building Material

• Customization: Available
• After-sales Service: All Life Technical Supports
• Warranty: 12 Months
• Model NO.: GD-9239
• Exhaust: 30~85m3/Min
• Power: AC 220V, 50/60Hz, 20A
• Size: 1, 400(W)×500(D)×2, 200(H)mm
• Console Size: 600(W)×750(D)×1600(H)mm
• Weight: 200kg
• Oversea Training: Available
• Transport Package: Standard Wooden Case
• Specification: 200kg
• Trademark: Gold
• Origin: Chongqing, China
• HS Code: 9031809090
• Production Capacity: 50pieces/Month

Product Description

ISO 9239 Flooring Radiant Panel Test Equipment for Building Material

              


Introduction:
This surface of the material spread flame tester (ISO 9239, Flooring Radiant Panel Tester) is test method that formal reflected spread of flame on flooring material back-draft condition when fire on building happened flame at compartment or room adjacent, or high temperature gas radiated to flooring surface a hot radiation heat accumulated at upper of midway during a fire at an early growing step. 
More detail as see the next view; specimen is located at down horizon of 30 degree sloped gas radiation panel per horizon surface. 
Pilot flame as ignition resource put a part edge of specimen on high temperature side. This equipment record ignition time by spark, moving time which flame horizontal pass by specimen of length.



Standard:
• ISO 9239-1:Reaction to Fire Tests for Floorings - Part 1:Determination of the Burning Behavior Using a Radiant Heat Source 
• ISO 9239-2 : Reaction to Fire Tests for Floorings - Part 2 : Determination of Flame Spread at a Heat Flux Level of 25kw/m2. 
• ASTM E 648 : Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source 
• ASTM E 970 : Standard Test Method for Critical Radiant Flux of Exposed at Attic Floor Insulation Using a Radiant Heat Energy Source 
• NFPA 253 : Standard Method of Test for Critical Radiant Flux of Floor Covering Systems Using a Radiant Heat Energy Source (National Fire Codes, Vol.6) 
• KS F ISO 9239-1 : Reaction to Fire Tests for Floorings - Part 1 : Determination of the Burning Behavior Using a Radiant Heat Source 
• KS F ISO 9239-2: Reaction to Fire Tests for Floorings - Part 2 : Determination of Flame Spread at a Heat Flux Level of 25kw/m2.
Features:

1. The stainless steel test box adopts the front door design to facilitate cleaning the inner wall of the box;

2. The inner wall of the box is calcium silicate plate, which is resistant to high temperature and corrosion;

3. Stainless steel smoke collecting hood device, as for the upper part of the combustion test box;

4. 300mm X 450mm porous ceramic thermal radiation plate, placed at an Angle of 30 °;

5. T-type porous burner is provided, open fire is applied to the sample, and cylinder driving mode is adopted;

6. The optical path system includes a light source of 2900 ± 100 K color temperature incandescent lamp, and the light source is accepted as a silicon photodiode;

7. The shutter is placed in the front of the silicon photodiode, which can be automatically opened and closed by the computer test software for easy calibration;

8. Rotameter regulates the flame height of t-type burner;

9. Propane mass flowmeter regulates gas flow rate of radiant plate and displays it digitally;

10. Provide air source with its own blower and test gas by venturi mixture;

11. Adopt mass flow controller to adjust the inlet flow of radiant plate;

12, SB water cooling heat flow meter, working range is 0-50 kW/m2, heat flow meter accuracy <±2%, response time is 0.2s, provide portable cooling water source, no need for external water;

13. The user can move the heat flux meter to conveniently calibrate the radiant plate heat flux, and the test software can draw the standard heat flux curve;

14. Equipped with foot switch, the user can obtain the flame spread time to reach the test distance according to the flame spread distance, and the computer can record by itself;

15. Install one thermocouple for each chimney and one thermocouple for each box, which can be displayed by computer software;

16. Equipped with infrared radiometer, which can detect the temperature of radiation plate and display it with computer software;

17. Equipped with a 15-inch industrial touch screen computer, the user can monitor the whole combustion test process through the test software;

18. The software can display the values of heat radiation flux, smoke density curve, transmittance curve, wind speed and other relevant test information.
Application:
Building Material
Rail
Car Interior
Other

Specification:
- Steel frame chamber:1400(W)×500(D)×2,220(H) 
- Calcium silicate insulation board 
- Observation window 
- Sliding platform for loading of the test specimen 
- Radiant Panel:300±10mm × 450±10mm (30°, Porous cement) 
- Auto moving ignition burner 
- Scale for check flame spread 
- K-type thermocouples : Range, Ambient ~ 1,500ºC 
- Stainless steel sample holders 
- Dummy calibration panel holders for measuring heat fluxmeter 
- Pyrometer for measuring radiant panel temperature 
- Exhaust duct & hood: Ø 300 / (W)1,700 x (D)1,200 x (H)400 mm 
- Heat Flux Meter 
  Range : 0 ~ 100 ± 10 kw/m2; 
  Surface emissivity : ε=0.95± 0.05; 
- DAQ(Data Acquisition) system 
  NI-PCI DAQ Board; 
  16 Bit wide gain rage, Analog and Digital I/O Board; 
  Three A/D trigger modes;