| Customization: | Available |
|---|---|
| Warranty: | 12months |
| Item Name: | IEC 61034 Flammability Testing Equipment |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
IEC 61034 Flammability Testing Equipment Smoke Density Analyzer For Cable is the testing equipment measuring the smoke generated when the cable or optical cable is placed horizontally and burn under definite fire resource in the specified condition (3m3 chamber required by IEC 61034).
IEC 61034 Flammability Testing Equipment Smoke Density Analyzer For Cable is important to measure the smoke generated from the value of light source penetration through the smoke generated when the cable exposed to the specified standard fire source (ethanol 90±1%, methanol 4±1% and distilled water 6±1%) 1L±0.01L is burned.
Features:
- Chamber internal area is 3000mm±30mm and it's structured as Cubic Enclosure with an appropriate fixed iron frame angle.
- It's configured with a door with test glass windows and in both faces of the opposite side, there's a sealed transparent window (minimum 100mmX100mm) with a horizontal light measurement system that allows light penetration.
- Designed to prevent direct sunlight exposure and severe weather change in Enclosure.
- Photocell and Light sources are located in the middle part of both windows of the wall surface in the opposite side to avoid physical contact.
- A lamp to provide regular light is installed.
- Two types of auto Filter system (Carrusel) are installed to automatically calibrate the transmissivity of light.
- The reduction of light by smoke is measured using Photocell.
- In order to verify accordingly the intensity of radiation to measure light change by self-emission, the equipment has been designed to fit various kinds of filters in the Light Source.
- Support system to allow separate fitting of Light Source and Photocell in the outer wall.
- The Light Source is a halogen lamp with a clean crystal lamp and tungsten filament.
- Average power: 100W, Average voltage: DC12v, Average velocity of light: 2000 lm~3000 lm, and Average color temperature: 2800K~3200K.
- The Receptor Photocell is selenium or silicone type and has a spectrum reaction conform to Photopic Observer (similar to a human eye) of the International Commission on Illumination (CIE).
- A heating system is installed within the cube to swiftly match the standard temperature (25ºC±5ºC) in the initial test.
- We seek tester's safety and convenience through an Auto ignition system.
Specification:
| Product name | IEC 61034 Flammability Testing Equipment Smoke Density Analyzer For Cable |
| control way | computer |
| Power | 220VAC 3A 50Hz |
| Weight | 500KG |
| Model | GD60134 |
| Exhaust Blower Power | AC220V, 60Hz, φ1, 210W |
| Transparent sealed window | 100*100mm |
| size | 3,000(W) × 3,000(D) × 3,000(H) |
| Exhaust Blower Size | 246(W) x 220(D) x 205(H) mm |
){kind=link}