ISO5658 Imo Spread of Flame Tester Flame Spread Testing Equipment

• After-sales Service: All Life Technical Supports
• Warranty: 1 Year
• Product Name: ISO5658 Flame Spread Testing
• Model Number: Gd-ISO5658
• Power Supply: 220 V AC, 60 Hz, 10 a
• Standard: ISO 5658-2, ASTM E 1317 Imo Spread of Flame Tester
• Model NO.: GD-ISO5658
• Dimension: 1650 * 810 *1985mm
• Control: Siemens /Sanling PLC Control System
• Material: Stainless Steel
• Weight: 300kg
• Transport Package: Plywood Case
• Trademark: GOLD
• Origin: China
• HS Code: 9031809090
• Production Capacity: 500 Sets/ Year

Product Description

ISO5658 IMO Spread of Flame Tester Flame Spread Testing Equipment

 Introduction:

 IMO Spread of Flame Tester is used to evaluate combustion characteristics of building materials and ship materials. It measures the spread rate of flame, the flame for ignition by distances, CFE (Critical Flux at Extinguishment), and total heat release.

This test method originated from ISO 5658-2 (Reaction to fire tests-Spread of flame- Part 2 Lateral spread on building products in vertical configuration) and measures combustion characteristics of the vertical specimen (155 mmX800 mm). 

The specimen is exposed to the reasonable radiant heat field and is measured by a thermocouple for exhaust gas calibrated through the progress of combustion as a unit of mV. 

The results are expressed in terms of the flame spread distance/time history, the flame front velocity versus heat flux, the critical heat flux at extinguishment, and the average heat for sustained burning. Total heat release (kW) and so on.

Standard of Spread of Flame Tester

• IMO Resolution A. 653(16): Recommendation on fire test procedures for flammability of bulkhead, ceiling, and deck finish materials
• ASTM E 1317: Standard test method for flammability of marine surface finishes
• ISO 5658-2: Reaction to fire tests -Spread of flame - Part 2 Lateral spread on building products in a vertical configuration

Specification:

Rail for easily measuring heat flux of radiant panel at an interval of 50mm.

IMO Program to facilitate all calibrations and tests as well as to print out results by standards (IMO, ISO).

Radiant panel temperature controller: Equipment to prevent flame back toward the back side of the Radiant panel, check the internal temperature of the radiant panel, and automatically block gas sol. v/v in case of flame back-flow.

MFC (Mass Flow Controller) to easily measure the heat amount of methane gas in measuring critical heat flux.

Explosion-proof options of all control systems for safety in combustion in the radiant panel as well as the Check-Valve and its Gas shut-off valve (Solenoid Valve) to prevent back-flow in a gas line.

Camcorder to observe and save test conditions in a program during tests.