Rtfot Rolling Thin Film Oven for Asphalt Testing Equipment

• Customization: Available
• After-sales Service: Online and Offline Service
• Warranty: 2 Years
• Model NO.: GD-0610
• Max Diameter of Workpiece: <500mm
• Mass Scope of Workpiece: <900kg
• Type: Universal Testing Machine
• Maxcapacity: <1000KN
• Accuracy Grade: 1
• Load Way: Electronic Load
• Loading Method: Static Load
• Display: Digital
• Control: Manual Control
• Weight: 0-100Kg
• Power Source: AC220V
• Oil Cylinder Position: Under
• Power Supply: AC220V, 50Hz
• Heating Power: 2.4kw
• Working Room Temperature: 163c
• Temperature Control Accuracy: 0.5c
• Rotary Speed: (15+-0.2) R / Min
• Air Flow: (4000+-200) Ml / Min
• Timing Device: 85 Minutes Alarm
• Ambient Temperature: (5 ~ 50)C
• Relative Humidity: No More Than 85%
• Overall Power Consumption: No More Than 2.6kw
• Rfto: Asphalt Rolling Thin Film Oven
• Transport Package: Wooden Case
• Specification: Refer to ASTM D2872
• Trademark: GOLD
• Origin: Made in China
• HS Code: 9031809090
• Production Capacity: 100sets/Month

Product Description

GD-0610 Rtfot Rolling Thin Film Oven for Asphalt Testing Equipment

 

Product Description

The surface of the Thin Film Oven is treated with plastics and the inner liner of working chamber is made of stainless steel. There are heat preservation layer and air conduit between the working chamber and shell of case. In order to prevent heat loss from working chamber affecting the temperature controlling accuracy and the controlling temperature, the heat preservation layer is filled with heat preservation materials. A floodlight is installed in the working chamber so that the user can observe test procedure in the chamber from outside. A rolling disk, which can hold 8 pieces of asphalt samples, is installed in the chamber. When you disassemble the rolling disk, the oven can be taken as a constant temperature case.

Main technical features

1. The Rolling Thin Film Oven is mainly composed of an electrical control part, an oven chamber, and a mechanical transmission device. The constant temperature room is equipped with a lighting lamp, which is convenient for outdoor observation of the indoor working conditions.
2. It adopts the ACO series electromagnetic air compressor and LZJ type air flow meter to meet and control the air flow required for the test.
3. It adopts 90YY60 / 90JB100 series gear motor system to accurately control the speed of test turntable.
4. It adopts high-precision intelligent temperature control instruments to ensure that the oven temperature reaches 163ºC ± 0.5ºC within 10 minutes after the sample is installed.

 

Product Parameters

1. Working power supply: AC (220 ± 10%) V; 50Hz.
2. Heating power: 2.4kW.
3. Working chamber temperature: 163ºC.
4. Temperature control accuracy: ± 0.5ºC.
5. Rotary speed: (15 ± 0.2) r / min.
6. Air flow: (4000 ± 200) mL / min.
7. Timing device: 85 minutes alarm.
8. Ambient temperature: (5 ~ 50)ºC.
9. Relative humidity: ≤85%.
10. Overall power consumption: no more than 2.6kW.

 

Accessories List

No.	Name	Unit	Quantity	Remark
1	Main unit	Set	1
2	Sample bottle	Piece	8
3	Thermometer	Piece	1	150~170 ºC, scale division is 0.5 ºC
4	Fuse 20 A (Φ6×30)	Piece	2	For later use
5	Socket (250 V 16 A three cores)	Piece	1

Common problems

No.	Problem	Cause	Solution
1	The indication light is off	No power supply	Connect to power supply
		The fuse is damaged	Replace it
2	The heater does not work	The fuse is damaged	Replace it
		The temperature controller is damaged	Replace it
		The heating wire is damaged	Replace it
		The solid relay is damaged	Replace it
3	Great deviation between displayed temperature and measured temperature	Incorrect parameters	Modify them
		The sensor is in trouble	Replace it
4	The rolling disk does not rotate	The motor is in trouble	Replace it
		The chain falls off	Connect the chain
		The screw of connection shaft is loosen	Tighten the screw
5	No airflow	The air compressor is damaged	Replace it
		The flow meter is unstable	Adjust it
		The pipe of air circuit falls off	Check the pipe connection
6	Insufficient airflow	The dry tower is not sealed	Tighten the connection parts of dry tower to seal it
		The nozzle is blocked	Clear the block using a piece of steel wire

Detailed Photos

Contact us

If you have any questions about this Rtfot Rolling Thin Film Oven for Asphalt Testing Equipment or the instruction, please contact us in time. We will serve you wholeheartedly!