| After-sales Service: | Lifetime Technical Support |
|---|---|
| Warranty: | 1year |
| Max Diameter of Workpiece: | 1600mm |
| Mass Scope of Workpiece: | <900kg |
| Type: | Bitumen Content Tester |
| Maxcapacity: | <1000KN |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 1. The Asphalt content furnace is designed and made ASTM D6307. It can determine asphalt content of the bituminous mixtures rapidly, correctly, safely and reliably. It is also used to analysis the asphalt mixtures after the combustion .
2. ASTM D6307 asphalt content test apparatus by ignition method covers the determination of asphalt content of asphalt mixture and asphalt pavement samples by removing the asphalt cement in an ignition furnace.
3. The Asphalt Content/Binder ignition oven with internal automatic balance is an environmentally-friendly and costeffective method for the accurate determination of asphalt content. It is made of three parts: combustion device (furnace), weight measurement (electronic balance), test control and data processing (microcontroller unit).
4.It can continuously, accurately, safely and reliably determine the asphalt content in asphalt mixture, and can meet the requirements of large-scale continuous production, highway supervision and scientific research institutions in the mixing plant.Ignition method asphalt content tester is used to determine the content of asphalt in asphalt mixture.
>>> The Asphalt Content/Binder ignition oven with internal automatic balance is an environmentally-friendly and costeffective method for the accurate determination of asphalt content. It is made of three parts: combustion device (furnace), weight measurement (electronic balance), test control and data processing (microcontroller unit).
>>> At the bottom of the chamber there are four dia.30mm tube ports. They are for four dia.16mm cast synthetic mica bars attached under a cordierite-mullite tray to get through the chamber, so that the tray can connect with the balance which could monitor the reduction in weight of the sample. Put the sample plate or basket on the tray for sample placement. Above the furnace chamber there is fumes assembly chamber where the fume mixes with air before exhausted through the flue by the fan.
1. The body of the combustion furnace adopts aerospace insulation materials .It has good warm-keeping effect and short preheating time .The heating rate is rapid and it can arrive to standard temperature 538ºC in the 30 minutes .
2. It has good heat insulation characteristic. when the inner of the furnace body arrives to the standard temperature , the temperature of outer furnace body will be lower than 45ºC ,and it has high operation safety ,for avoid the influence of the high temperature on the electronic scales measurement accuracy .
3. It adopts the second combustion function and high temperature filtration technology .The test exhaust emission reach the standard .
4. The function of the software is powerful .It can display temperature ,sample weight ,weight loss ,correction coefficient ,asphalt content and asphalt aggregate ratio .
5. Safety protection ,no use organic solvent that can damage the human's healthy and environment ,it is a green product .
6. 7inch industrial stage touch-screen .and the screen display large information ,operation is simple and convenient ,the work is reliable .Put the sample into the furnace and close the furnace door ,press the open key ,the instrument can be finished the determination automatically.
7.Real-time display test procedure data ,and it has self diagnostic function ,fault code indication function ,it can inquire about the history data and deal with it .
8. After the test finished ,the instrument has voice indication function and it can save and print out the test results.
9. it can connect with computer and common printer .
| 1 | Max. sample weight | 4000g , recommended sample weight :(1000~2000) g |
| 2 | Combustion chamber maximum temperature | 800ºC ,accuracy :+5 ºC ,standard working temperature :538 ºC |
| 3 | Maximum temperature after burning | It can reach to 900 ºC |
| 4 | Combustion and filtration | It adopts after-burner the second combustion and high temperature filtration technology. The test exhaust emission can reach the standard |
| 5 | Balance accuracy | 0.1g ,range of balance :10kg(American imported balance ) |
| 6 | Test precision | 0.10% |
| 7 | Test time | 1200g sample only needs 30 minutes |
| 8 | The dimension of the combustion chamber | 350mm*440mm*330mm |
| 9 | Overall dimension | 700mm*800mm*1550mm |
| 10 | Power supply | AC380V+10V,50Hz, current meter ≤ 40A(three-phase four-wire system, with zero line) |
About us:
Chongqing Gold Mechanical & Electrical Equipment Co.,Ltd is a high-tech enterprise for researching, designing, developing and producing scientific and measuring instruments. With its continuous drawing of lessonas, unremitting innovation and borrowing of advanced technology from both at home and abroad, our company is now becoming a professional manufacture of oil tester,laboratory instrument,road building instrument.
Welcome to contact us talk about details if you are interested in ASTM D6307 NCAT Bitumen Content Tester of Asphalt Mixture by Ignition Furnace Method.If you want to know more information,Don't hesitation, welcome your inquiry!Price can be negotiated !
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}