ASTM D93 PMCC Method Automated Pensky-Martens Flash Point Tester
Mixing based on liquid evaporation and combustible vapor. Place the sample in a closed testing chamber, and as the sample is heated, the temperature gradually increases. When a certain temperature is reached, the sample begins to produce flammable vapor, which is ignited by an igniter. If the flammable vapor is ignited and produces an instant flame, the temperature corresponding to this flash is the flash point. The sensor equipped on the instrument will detect and record this temperature.
Introduction:
The Pensky-Martens Flash Point Tester is designed and manufactured as per standards GB/T 261-2008 Determination of Flash Point - Pensky-Martens closed cup method and ASTM D93 Standard Test Method for Flash Point by Pensky-Martens Closed Cup Tester.
Pensky Martens Flash Point Tester is used to make determination of the closed cup flash point of the petroleum products.
1. The Pensky-Martens Flash Point Tester adopts an 8-inch IPS high-definition capacitive screen.
2. Using 32-bit ARM processor and high-precision AD chip, the test data and parameters are recorded in real time and displayed by curve.
3. Equipped with Bluetooth interface.The user can query test data anytime.
4. Remote automatic upgrade to obtain the latest version, remote prediction, abnormal early warning, comprehensive evaluation and maintenance of instrument operation status.
5. Automatic measurement of atmospheric pressure, automatic correction of flash point value.
6. Temperature rise, cover opening, ignition, detection and printing data are completed automatically, and the test arm rises and falls automatically.
7. Electronic ignition, gas flame, automatic air cooling at the end of the test.
| 1 |
Power supply |
AC(220±5%)V,50Hz |
| 2 |
Stirring rate |
Procedure A and C: (90~120)RPM,
Procedure B: (250±10)RPM
Automatic control and manually adjustable. |
| 3 |
Flash point determination:Range |
Ambient to 230ºC; Accuracy:0.1ºC |
| 4 |
Data transmission mode |
Bluetooth |
| 5 |
Total power consumption |
≤600W |
| 6 |
Suitable temperature |
Ambient temperature:(15~35)ºC; Relative humidity:≤85% |
| 7 |
Heating rate |
Procedure A: (5~6)ºC/min,
Procedure B: (1~1.5)ºC/min
Procedure C: (3.0±0.5)ºC/min |
| 8 |
Igniting mode |
(1)Electric ignition. (2)Diameter of igniter:0.7mm~0.8mm |
Audited Supplier 
){kind=link}