ASTM D93 Pensky Marten Flash Point Apparatus Pensky Marten Tester petroleum products
Introduction about GD-261D Automated Pensky-Martens closed cup flash point tester
>>> Flash point is the lowest liquid temperature at which a test flame causes sample vapors to igniting. Fire point is the temperature at which the test flame causes the sample to igniting and remain burning for ≥5 seconds.
>>> You can determine flash points up to 400 °C using either standard mode for where the flash point is known or search mode for when it is not. Once complete, the PM-93 graphically displays results on the LCD screen. You can save results to the internal memory, email the results, export results to a USB, or transfer results via QR code.
| Applicable Industry |
Petroleum, chemical industry, electric power, environmental protection, railway, aviation, scientific research, etc |
| Applicable Types |
Lubricating oil, insulating oil, transformer oil, turbine oil, anti fuel oil, diesel oil, kerosene, essence, spices, etc. |
Which scenarios are suitable for fully automatic closed flashing test?
>>> This standard specifies the method of determining the combustible liquid with Pensky-Martens closed-cup flash point tester, liquid with suspended particles, liquids that tend to make the film under the test conditions, and other liquid flash points. This standard applies to samples with flash point higher than 40 ºC.
Note 1: The flash point of kerosene is above 40 ° C. Although this standard can also be used, the flash point of kerosene and oil is generally determined according to the ISO 13736. The flashing point of lubricating oil is usually determined by ASTM D93.
Note 2: Jet fuel with flash point below 40 ° C can also be measured by this standard.
Technical Features of ASTM D93 Pensky Marten Flash Point Apparatus
1. The pensky martens closed cup apparatus adopts LCD screen to display. Full English man-machine dialog interface. It can preset the parameters of expected flash point,sample mark number, atmospheric pressure, test date,etc.It has menu to prompt and input function of guide type.
2. It adopts simulation tracking display the function curve of temperature rising and test time.It has prompt functions of English mis-operation,test date and test time.
3. It is equipped with standard RS-323,485 computer port.The lower computer can save 100 groups of historical data. The test data can be saved for a long time, transmitted and modified if the instrument being connected with computer.
4. It can correct the influence of atmospheric pressure and calculate the correction automatically.
5. Differential detection.Automatically correct the systematic deviation.
6. Automatically open the lid,igniting,detect and print test data.The test arm lifting up and down automatically.
7. The pensky martens closed cup tester adopts electric ignition to fire light the gas flame.It will light only need to press the button.
8. Humanized design,beautiful and safe. Easy to operate.
What are the technical parameters of the fully automatic closed flash test?
| 1 |
Power supply |
AC(220±5%)V,50Hz |
| 2 |
Total power consumption |
≤600W |
| 3 |
Flash point determination |
Range: Ambient to 400ºC |
| 4 |
Accuracy |
0.1ºC |
| 5 |
Heating rate |
Procedure A: (5~6)ºC/min, |
| Procedure B: (1~1.5)ºC/min |
| Procedure C: (3.0±0.5)ºC/min |
| 6 |
Stirring rate |
Procedure A and C: (90~120)RPM |
| Procedure B: (250±10)RPM |
| 7 |
Automatic control and manually adjustable. |
| 8 |
Igniting mod |
(1)Electric ignition. |
| (2)Diameter of igniting:0.7mm~0.8mm |
| 9 |
Data transmission mode |
Bluetooth |
| 10 |
Suitable temperature |
Ambient temperature:(15~35)ºC |
| 11 |
Relative humidity |
≤85% |
| 12 |
Dimension |
510mm×320mm×330mm |
| 13 |
Net weight |
20kg |
| 14 |
Measurement mode |
Thermocouple differential detection |
Product detail display of the automatic closed flash point tester
Company information
Chongqing Gold Mechanical & Electrical Equipment Co., Ltd. advantages and a high reputation in the international market. After more than 20 years of development, our products have become high intelligent and wide coverage.And our company has become one of the leading manufacturers of oil test instrument and asphalt test instrument.
We have persisted in the business idea of "integrity basis and quality first" for the stable and constant development. We're always making efforts to develop together with customers from both domestic and abroad on the basis of reciprocity. Client, Quality and Service are our supreme target!
Feel free to contact us for any questions on Pensky Marten Flash Point Apparatus!
Audited Supplier 
){kind=link}