Needle Flame Test Chamber IEC 60695

• Customization: Available
• Product Name: Needle Flame Test Chamber
• Standard: IEC 60695
• Model NO.: GD-IEC60695
• Dimensions: 1120 mm(L)* 520 mm(W)* 1250 mm(H)
• Diameter of Exhaust: 100 mm
• Power Supply: 220 V / AC, 50 Hz
• Temperature Range: 0--1000 (Degree)
• Flame Temperature Requirements: 100±2~ 700ºC±3 (Degree)
• Heating Rise Time: 23.5±1.0 S
• Warranty: 12 Months
• Transport Package: Plywood Case
• Trademark: GOLD
• Origin: Chongqing China(Mainland)
• HS Code: 9031809090
• Production Capacity: 500 Sets/ Year

Product Description

Needle Flame Test Chamber IEC 60695

Introduction:
The needle flame test chamber uses a needle burner of the specified size (φ0.9 mm) to ignite the sample at a 45° angle with a specific gas (butane) to see if the sample is ignited and burned. And the length of the burn to assess the fire risk of small flames inside the equipment due to fault conditions.
Suitable for research, production and quality supervision departments and insulation materials for electrical and electronic equipment, components and components of lighting, low-voltage electrical appliances, household appliances, machine tools, electromechanical, electric tools, electronic instruments, electrical instruments, electrical connectors, accessories, etc. , engineering plastics or other solid combustible materials industry, etc., the simulation test of the lower flame ignition source program.

Standard:   
GB 4706.1: Household and similar electrical appliances-Safety Part 1:General requirements
GB/T 5169.5: Fire hazard testing for electric and electronic products. Part 5:Test flames.Needle test method.Apparatus, confirmatory arrangement and guidance
IEC 60695-2-2: Fire hazard testing; part 2: test method; section 2: needle-flame test
IEC60695-11-5: Fire hazard testing. Part 11-5: Test flames. Needle-flame test method. Apparatus, confirmatory test arrangement and guidance

Technical Parameters:

1. Needle burner: stainless steel, inner diameter of ¢ 0.5 ± 0.1 mm, an outer diameter of not more than ¢ 0.9 mm, length 35 mm more needles, no air access;
2. The burner angle: vertical (when adjusting and measuring the flame height) or inclined 45 ° (the test);
3. Combustion gases: 95% butane gas or propane gas;
4. Ignited bedding layer: white pine plank (thickness 10 mm), surface covering 12 ~ 30 g / m² standard tissue paper layer is applied at lower flame from 200 mm ± 5 mm;
5. Temperature range: 0--1000 ºC;
6. The flame temperature requirements: from 100 ± 2 ºC ~ 700 ºC ± 3 ºC, should be completed within 23.5 ± 1.0s;
7. The flame height: 12 mm ± 1 mm;
8. Burning time: 0s ~ 999.9s adjustable, generally set at 30s;
9. Holding burning time: 0s ~ 999.9s, automatic recording, manual pause;
10. Test Space: ≥0.5 m3, black background, (can be customized cubic 0.75 m³ or 1 m³ according to customer requirements);
11. Temperature sensor: K-type insulation-sheathed thermocouple (Φ 0.5 mm);
12. Test program automatic control, independent ventilation system;
13. Dimensions:1120 mm(L)* 520 mm(W)* 1250 mm(H), exhaust Φ 100 mm;
14. Test Power: 220 V / AC, 50 H.

Product Image:




 

Specification:

Dimensions	1120 mm(L)* 520 mm(W)* 1250 mm(H)
The diameter of exhaust	100 mm
Test power supply	220 V / AC, 50 Hz
Temperature range	0--1000 (Degree)
The flame temperature requirements	100±2~ 700ºC±3 (Degree)
Heating rise time	23.5±1.0 s