| Customization: | Available |
|---|---|
| After-sales Service: | Lifetime Technical Support |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1. GD-0165A Vacuum Distillation Apparatus is designed and made as per industrial standard SH/T 0165-92 Test Method for Distillation Characteristics of Petroleum Products with High Boiling Point Range by Vacuum Process.
2. GD-0165A Vacuum Distillation Apparatus is suitable to determine the distillation characteristics of wax oil, lubricating oils and other petroleum products with high boiling point range.
3. Easy to Use: PC control automates the D1160 test from beginning to end. New and experienced operators will find this system simple to use. The software steps you through the testing process from start up to printing of results. Easy to understand software and easy access to all the distillation components makes performing the test as simple as possible.The distillation range of petroleum product partial or full distilled at a maximum liquid temperature of 400 ° C can be measured under reduced pressure.
The Crude Oil Distillation instrument consists of a distillation flask heating furnace, heating power regulator, receiver cylinder receiver and its air bath temperature control system, vacuum system, vacuum pressure gauge, lighting system, heating furnace cooling device and etc.
The appearance of the instrument is shown in Figure 1. The functions of each part are as follows:
1. Vacuum connection and connector: Connect the vacuum pump.
2. Vacuum regulator: Adjust the degree of vacuum.
3. Digital pressure gauge: Displays the vacuum pressure value.
4. Lighting: Illumination in the studio.
5. Glass door: The inside of the door is a measuring cylinder air bath. Open this door for test operation.
6. Heating furnace: Electric heating furnace.
7. Distillation flask: The built-in sample is placed on a heating furnace.
8. Thermometer: Glass tube thermometer, inserted in a distillation flask.
9. Distillation flask fixing plate: The neck of the distillation flask was fixed together with the fixing bar under the fixing plate, and the distillation flask was not lowered when the electric furnace was lowered.
10. Furnace lift knob: On the right side of the instrument, it is used to adjust the height of the furnace.
11. Vacuum pump: External vacuum pump used for decompression during instrument test.
12. Vacuum pump connection pipe interface: It is the vacuum pump connected to the instrument vacuum system.
13. Temperature control table: Controls the temperature of the air cylinder of the receiver cylinder.
14. Temperature sensor: Temperature detection sensor of the temperature control meter.
15. Receiver cylinder: A volume of 100 ml, receiving distillate.
16. Voltmeter: Shows the magnitude of the heating voltage, which in turn reflects the level of heating power.
17. Light switch: Turn this switch on and the work room light is on.
18. Cooling switch: Turn this switch on and the furnace cooling fan works.
19. Power switch: Turn this switch on and the instrument is powered on.
20. Heating adjustment knob: Adjust the working voltage of the furnace.
1. GD-0165A Vacuum Distillation Apparatus adopts high accuracy pressure sensor and digital pressure gauge. The design is reasonable and technology is advanced. It can meet requirements of standard SH/T 0165-92.
2. The power of the heating furnace can be adjusted continuously. It equips a cooling device to make the heating furnace cooled down rapidly after determination. It is convenient for next test.
3. The vacuum pump has good effect and rapid vacuum time. The max residual pressure is 2mmHg.
| 1 | Power supply | AC(220±10%)V, 50Hz |
| 2 | Heating power | Heater for distillation flask :1000W,Heater for receiver:350W |
| 3 | Heating furnace of distillation flask | (0~1000)W, adjustable |
| 4 | Temperature control point of air bath of receiver | Room temp.~100ºC, adjustable |
| 5 | Temperature sensor of air bath | Pt100,RTD |
| 6 | Temperature control mode | Digital temperature controller |
| 7 | Temperature control accuracy | Set temp.±1ºC |
| 8 | Volume of buffer tank | 1000ml |
| 9 | Max residual pressure | 2mmHg |
| 10 | Digital pressure gage | (0~200)mmHg |
| 11 | Lamp of air bath | Energy saving lamp |
| 12 | Working condition | Ambient temp.:(5~35)ºC RH:< 85% |
| 13 | Dimension | 580mm×230mm×605mm |
What service can our company provide you?
Pre-sale Service:
1. The professional sales team will reply to the inquiry in real time;
2. Customize suitable solutions according to the needs of different customers;
3. Provide product technical parameters/operation manuals and evaluation reports, etc.;
After-sale Service:
1.From the date of purchase within one year instrument, is a product quality problem free repair replacement, lifetime supply of maintenance and technical services.
2.Technical Support
(1)Our technical team supports our customers at all time with our long experience, expert advice and the unlimited spirit and always be for providing the best customer service.
(2)Training how to install the machine,you can arrange your engineer to our company to get free training.
(3)If necessary, we can also arrange our engineer to your company for training and commissioning at your cost.
3.The instrument has found anomalies or malfunctions please contact us to arrange the most convenient treatment options.
If you are interested in our ASTM D1160 Lab Crude Oil Distillation Vacuum Distillation Price for Petroleum Products product or have any questions, please feel free to contact us.
){kind=link}