1000V-30kv High Voltage Boots/Gloves Tester Dielectric Strength Testing Equipment for Boots&Gloves

• After-sales Service: Lifetime Technical Support
• Warranty: 1 Year for High Voltage Boot (Glove) Tester
• Type: High Voltage Boot (Glove) Tester
• Accuracy Grade: 1
• Load Way: Electronic Load
• Loading Method: Static Load
• Model NO.: GDDZ
• Display: Needle
• Control: Manual Control
• Weight: 0-100Kg
• Power Source: AC220V
• Product Name: High Voltage Boot (Glove) Tester
• Capacity: 3kVA
• Input Voltage: 0-220V,50Hz
• Output Voltage: 0-30kv
• Measurement Accuracy 1: Voltage:±2% (±3 Digits)
• Measurement Accuracy 2: Current:±2% (±3 Digits)
• Transport Package: Wooden Case
• Specification: ask the salesman
• Trademark: GOLD
• Origin: Chongqing, China
• Production Capacity: 200 Sets/ Month

Product Description

1000V-30kV High Voltage Boots/Gloves Tester
Dielectric Strength Testing Equipment for Boots&Gloves
 

Brief introduction:

Insulated Boots (Gloves) Test Units, also known as Insulated Boots (Gloves) Test Equipment, are used to test and evaluate the insulation and voltage resistance of insulated boots (gloves). These devices are widely used in the electric power industry, industrial fields and laboratories to ensure the personal safety of workers in high-voltage environments.

Structural design:

The product is composed of two parts:
1. insulated boots (gloves) test trolley, the test trolley consists of mobile bracket, water-containing water tank, electrode rod support and so on;
2. insulated boots (gloves) test bench, insulated boots (gloves) test bench consists of transformer and its control part.

1. Moved tray
     
2. Sink with water
     
3.Insulated poles

4. Electrode pole
   
5.HV terminal   
 
6.leakage terminal
 

Test bench:
 

Precautions:

1. During the test, the operator should operate at a safe distance (less than 20KV per meter in the air), and the frequency withstand voltage test bench must be reliably grounded, with a grounding resistance of less than 0.1Ω.
2. Insulation resistance should be tested before use, and its insulation resistance value should be more than 2MΩ.
3. Before use, check whether the contacts of each electrical component are loose, whether the contact is good, and whether the protection system can work normally.
4. Before use, the insulated pole, electrode, electrode rod, water tank and other parts should be wiped with alcohol.
5. After the test, the water should be discharged, and the parts should be dried with cotton cloth. If not used for a long time will be the water tank, electrode rod, insulation pole in a dry and ventilated place to save.
6. The work and storage place should be free of gas, steam, chemical dust and other explosive and erosive media that seriously affect the insulation.

Transport and protection:
 

1. When this device is transported, it should be covered with a plastic bag to prevent moisture, and the box is padded with foam around to prevent shock.

2. During handling, hard impact should be prevented.

3. The device should be stored in a dry and ventilated place where the relative humidity is not more than 80% and there are no corrosive substances.