Customization: | Available |
---|---|
After-sales Service: | Lifetime Technical Support |
Warranty: | 2 Years |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Introduction:
Automatic Aniline Point Tester is designed, developed and manufactured according to American Standard ASTM D611 "Standard Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents - Test Method B". It is suitable for the determination of the aniline point of petroleum products and hydrocarbon solvents, also for the determination of the mixed aniline point of petroleum products and hydrocarbon solvents having aniline points below the temperature at which aniline will crystallize from the aniline-sample mixture. Terminology:
Aniline Point: the minimum equilibrium solution temperature for equal volumes of aniline and sample.
Mixed Aniline Point: the minimum equilibrium solution temperature of a mixture of two volumes of aniline, one volume of sample, and one volume of n-heptane of specified purity.
Summary of Test Method: Specified volumes of aniline and sample, or aniline and sample plus n-heptane, are placed in a tube and mixed mechanically. The mixture is heated at a controlled rate until the two phases become miscible. The mixture is then cooled at a controlled rate and the temperature at which two phases separate is recorded as the aniline point or mixed aniline point.
Technical Features
1.Automatic control of test process: sample mixing, heating & cooling at controlled rate, aniline point detection, test results verification & calculation, saving and printing are all performed automatically.
2. HD 7-inch high resolution 800*480 Pixels LCD touch screen display, touch screen button control. English HMI with user-friendly guidance.
3. Photoelectric sensor utilized for aniline point detection, repeatability and reproducibility meet ASTM D611 standard requirements.
4. Specially designed aniline point test tube, compact, convenient & user-friendly.
5. Class-A Pt100 high accuracy & sensitivity temperature sensor for sample temperature measurement.
6. High precision temperature control system for "rapid heating"(10ºC/min) mode, "program heating" mode and sample cooling at controlled rate.
7. Selective standard or fast procedure test settings, validity of multiple results are automatically calculated under standard mode with clear illustration.
8. Manually adjustable brushless stirring motor for sample mixing rate control.
9. Equipped with a fault self-diagnosis system and prompt function, test results storage capacity of 256 sets (first-in, first-out).
10. Temperature limit function, test automatically ends & prompts if sample temperature exceeds limit setting
No |
Parameter |
|
1 |
Operating voltage |
AC220V±10%, 60Hz |
2 |
HMI |
HD 7-inch high resolution LCD touch screen |
3 |
Temperature control range |
R.T.~170ºC |
4 |
Temperature resolution |
0.1ºC |
5 |
Repeatability |
≤ ±0.2 ºC |
6 |
Detection method |
photoelectric sensor, real-time detection, high accuracy, stable and reliable |
7 |
Heating method |
Heating rod inside test tube, heating power 50W |
8 |
Heating rate under test phase |
2ºC/min |
9 |
Cooling rate under test phase |
0.75ºC/min |
10 |
Automation |
sample mixing, heating & cooling at controlled rate, aniline point detection, test results correction & calculation, saving and printing |
11 |
Temperature sensor |
Class-A Pt100 |
12 |
Printing |
thermal printer, automatic printing |
13 |
Mixing method |
brushless motor soft-shaft mixing |
14 |
Sample mixing rate |
100~1500rpm continuously adjustable |
15 |
Environmental temperature |
5ºC~35ºC |
16 |
Relatively humidity |
≤85% |
Product Structure:
Packing List:
No. |
Items |
Quantity |
Unit |
1 |
Automatic Aniline Point Tester |
1 |
Set |
2 |
Power Cord (BS) |
1 |
Pc |
3 |
Test Tube |
1 |
Pc |
4 |
Test Assembly Cap |
1 |
Set |
5 |
Pipette |
2 |
Pc |
6 |
Sample Tray |
1 |
Pc |
7 |
Printer Paper |
2 |
Rolls |
8 |
Fuse (installed) |
1 |
Pc |
9 |
Operating Instruction |
1 |
Copy |