Gdgs Transformer Ipf Power Factor Tester Tan Delta Tester

• Customization: Available
• After-sales Service: Lifetime Technical Support,Online Service
• Warranty: 1 Year for Transformer Tan Delta Tester
• Model NO.: GDGS
• Power: Electronic
• Output Voltage: AC 0.5kv~10kv
• Testing Voltage Setting Resolution: 0.5kv
• Maximum Output Capacity: 200mA
• Testing Frequency: 45Hz/55Hz
• Test Mode: Fully Automatic
• Tangent Delta: 1%Rdg+0.04%
• Transport Package: Plywood Case
• Specification: 470mm(L) × 320mm(W)× 390mm(H)
• Trademark: GOLD
• Origin: Chongqing, China (Mainland)
• HS Code: 9031809090
• Production Capacity: 100 Set/Sets Per Month

Product Description

GDGS Transformer Power Factor Tester Tan Delta Tester 

HV Output Terminal by GDGS IPF Tester

Introduction:
Transformer IPF Power Factor Tester Tan Delta Tester

• GDGS Automatic Transformer Power Factor Tester, Transformer Tan Delta Tester is an integrated structure, there is a dielectric loss test bridge, a variable frequency power supply, a step-up transformer and a SF6 high stability standard capacitor built-in;

• It can also supply high voltage source for testing.

• Frequency can be changed to 50Hz, 47.5Hz\52.5Hz,45Hz\55Hz, 60Hz, 57.5Hz\62.5Hz, 55Hz\65Hz; thus, it can avoid interference of power frequency;

• It can also use generator as power supply;

• If equipped with a insulation oil vessel and a temperature detector, it can also measure tan delta of insulation oil;

Specifications:
Transformer IPF Power Factor Tester Tan Delta Tester
 

No.	Item	GDGS Transformer Insulation Power Factor Testing Equipment
1	Accuracy	Cx±(reading×1%+1pF) PF±(reading×1%+0.00040)
2	Interference Ratio	Interference current is no more than 2 times of test current
3	Capacitance Range	Internal HV:  3pF~60000pF / 10kV,60pF~1uF/0.5kV External HV  3pF~0.3uF/10kV Resolution  0.0001pF, 4 digital
4	PF Range	No limit, Resolution 0.001%, C/L/R specimen test
5	Input current range	10μA~1A
6	Internal HV	0.5~10kV / 200mA (max)
7	HV Adjust	Rise or fall smoothly
8	HV Accuracy	±(reading×1%+10V) Resolving 1V
9	Frequency select	60Hz single point, locked 55Hz/65Hz double point, locked
10	Test Time	40S typical
11	Power Supply	180V~270V 50Hz/60Hz auto
12	Operating Temperature	0ºC~60ºC
13	Storage Temperature	-20ºC~60ºC
14	Humidity	<90%

Working Principle:
Transformer IPF Power Factor Tester Tan Delta Tester
 

• In the AC voltage, the dielectric to consume part of the energy, this part of the energy will be converted to heat energy loss. This energy loss is called dielectric loss.
• When AC voltage is applied on the dielectric, the dielectric between voltage and current in phase difference angle psi, delta psi is called the dielectric loss angle tangent TG delta delta is called dielectric loss tangent. TG delta value is used to measure dielectric loss parameters. The instrument measuring circuit includes a standard circuit (Cn) and a test loop (Cx), as shown in Figure 2 - 1. The standard circuit is composed of a built-in high stability standard capacitor and a measuring circuit. Measurement line sampling resistor with pre amplifier and A/D converter. By measuring circuit are respectively measured by standard test and loop current loop current amplitude and phase difference, then the digital signal processor using digital real-time acquisition method, obtained through vector operation test of capacitance and dielectric loss tangent value. The anti-interference measures have been adopted in the instrument to ensure the accurate measurement under the interference of external electric field.

Order & Customer Feedback:
Transformer IPF Power Factor Tester Tan Delta Tester


Certificates: