45 Degree Burning Damage Area and Number of Flames Tester

• After-sales Service: All Life Technical Supports
• Warranty: 12 Months
• Product Name: 45 Degree Burning Damage Area Flame Tester
• Standard: ASTM D 1230
• Dimension: 750(W) X 300(D) X 900(H)mm
• Power Supply: AC 220V, 50/60Hz, 5A
• Model NO.: GD-ASTMD1230
• Weight: 50 Kg
• Instruction Manual: Provide
• Flame Height Ruler: One
• Sample Holder: Two Pairs
• Transport Package: Plywood Case
• Trademark: GOLD
• Origin: Chongqing China(Mainland)
• HS Code: 9031809090
• Production Capacity: 500 Sets/ Year

Product Description

45 Degree Burning Damage Area and Number of Flames Tester

 

Product Description

Introduction:

45 Degree Burning Damage Area and Number of Flames Tester is designed and manufactured according to the latest version of the national standard GB/T14645. It is suitable for measuring the damaged area and damaged length of the textile fabric when it is burned at 45°, or for measuring the number of flame contact when heated to the specified length. It can evaluate the conformity of the refractory to the refractory execution standard according to the combustion method, measuring the afterglow of the sample installed at a 45-degree angle and the combustion characteristics of complete combustion.

Standard:

• ASTM D 1230: Canadian fabric minimum flame test standard
• NFPA 702: Flame Retardant Standards for California Hospital Apparel and Bedding Fabrics
• CA TB 117 (2000): Flame retardant test standard for synthetic materials (Section C)
• GB/T14645-2014 "Determination of Burning Performance of Textile Fabrics in 45° Direction of Damage Area and Number of Flame Contacts"

Main Features:

Common parts of the structure:
• Sheet metal spray paint, elegant and corrosion-resistant;
• Heat-resistant glass door makes it easy to observe the internal test status.
• The internal tooling is made of stainless steel;
• Power switch to provide or cut off power
• Start switch to start the test
• There are 6 ventilation holes on the top of the box;
• The sample holder needs to be replaced for different experiments;
• Imported flow regulating valve to accurately control the flame height;
• Imported brand pressure gauge and pressure regulating valve;

Damage area test part:
• Rotor flowmeter with a needle valve to adjust the flame height. Flame height: 45±2m
• Complete burning time: the counter displays the afterglow time with a resolution of 0.1s
• Afterglow time: the counter shows the time of complete combustion with a resolution of 0.1s
• Flame spread time: set the time for the sample to catch fire (flame spread time)
• Reset the switch that sets the counter to "0"
• Temperature display range and accuracy: 0~90±1ºC
• Imported brand pressure gauges and pressure regulators can display gas pressure
• Complete combustion stop switch for stopping afterglow time
• Afterglow stop switch for stopping the complete combustion time
• Integrator is optional;

The flame test part:
• Place the sample holder at 45 degrees in the box;
• Timer accuracy is 0.1s. Automatic timing
• Counter: Automatically record the number of flame connections;
• The sample holder is wound from 0.5mm hard stainless steel wire into a spiral coil with an inner diameter of 10mm;
• The gas torch has no air inlet. It can use butane or propane gas, gas outlet 0.2mm, flame outlet 6.4mm;
• Gas flow: 0~1000ml/min
• Electronic ignition, timing digital display.

Specification:

Model	GD-ASTMD1230-1
Dimension	750(W) x 300(D) x 900(H)mm
Power Supply	AC 220V, 50/60Hz, 5A
Weight	50 kg
Instruction Manual	Provide
Flame height ruler	One
Sample holder	Two pairs