Product Description
The Cable Wire Halogen Acid Gas Release Testing Machine is conformance to IEC60754 and several standards,The wire and cable gas acidity tester is a test equipment used to test the acidity of the gas released by the materials on the components of the cable or optical cable when burning; the equipment is designed and produced according to GBT17650 and IEC60754; the equipment processes the cable material through the Pyrex pipeline furnace, and determines the acidity of the gas generated during the combustion of the cable material by measuring the pH value and conductivity of the released gas, including the gas volume, pH concentration, conductivity, etc. of the hydrohalic acid.
The equipment is accurate in testing, reasonable in structure and simple in operation, compared with similar products, the price is more advantageousand is convenient for wire and cable manufacturers, colleges and universities, commodity inspection departments and scientific research units.
Standard
| IEC 60754-1 |
Test on gases evolved during combustion of materials from cables - Part 1: Determination of the amount of halogen acid gas |
| IEC 60754-2 |
Test on gases evolved during combustion of electric cables - Part 2: Determination of the degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring pH and conductivity |
Product Features
1. Optimized structural design, reasonable layout, easy operation;
2. All enclosure is made of stainless steel;
3. The effective length of the tubular furnace is 500~600mm, the inner diameter is 40~60mm, and it is equipped with an adjustable electric heating system;
4. Equipped with American imported thermocouples;
5. The size of the combustion boat is 45~100mm long, 12~30mm wide, and 5~10mm deep;
6. The range of the conductivity measurement device is 0.01uS/mm~100uS/mm;
7. The control room uses electronic temperature control to intelligently control the temperature of the tubular furnace;
8. Equipped with 2 gas collection bottles
9. The sample chamber size is 1 liter
10. Equipped PH value and conductivity tester with electronic display and electrodes
11. Airflow meter and all necessary silica fireproof pipes to prevent corrosion by gas.
12. Activated carbon (air filtration): filter the air source through the filter
13. Silica gel is used to dry the air source;
14. Pyrex pipe: users can easily insert the sample into the Pyrex furnace tube to protect the pipe from damage
15. Combustion boat moving system: the motor automatically moves the combustion boat device; making the test more intelligent;
16. Mode conversion: mode conversion switch (two test methods are available, IEC 60754-1&IEC 60754-2)
17. Temperature alarm controller: control the temperature in the furnace to prevent overheating
18. Timer: IEC 60754-1 or IEC 60754-2 Device for measuring time in the test
19. Drawer: a box for storing accessories (such as conductivity meter, pH meter, etc.)
20 Temperature display: displays the core temperature of the furnace
21. Permanent magnetic stirrer: a stirrer for mixing combustion gases in distilled water
22. Conductivity meter: an instrument for measuring the conductivity of combustion gases
Test experiment process
Frequently Asked Questions
1 The temperature is not displayed or displayed abnormally.
Solution:
a) Check whether the thermocouple is in the correct position.
b) The thermocouple may be damaged and needs to be replaced.
2 There is no timing during the test.
Solution:
- The sensor switch may be damaged.
Safety protection
1 The power socket of the equipment must be grounded;
2 During the test, the temperature is high. When operating, pay attention to the high temperature
and do not touch it by mistake, which may cause burns;
3 After the test, the test device must be cleaned.
Company Profile
Exhibition
Customer praise
Packaging & Shipping
Audited Supplier 
){kind=link}