BS6387 Fire Resistance and Spray Tester for Wire and Cable Test Apparatus

• Customization: Available
• After-sales Service: All Life Technical Supports
• Warranty: 12 Months
• Model NO.: GD-6387-3
• Standard: BS6387, IEC 60331-12 & 31
• Console Size: 600 (W) *750 (D) *1, 600 (H) mm
• Power Supply: AC 220V, 50 / 60Hz, 15A
• Weight: 1500kg
• Oversea Traning: Available
• Transport Package: Plywood Case
• Trademark: Gold
• Origin: China
• HS Code: 9031809090
• Production Capacity: 10 Sets/Month

Product Description

BS6387 Fire resistance and spray tester for wire

 

Introduction:

The majority of wires and cables that can pass the GB/T18380.3 test are those that are hard to ignite and have the capacity to stop or slow the spread of flame. This device is used to evaluate the flame retardant performance of the insulating layer of electrical wires and cables under unusual situations such as overheating and overcurrent. It was designed in accordance with standard BS6387. It is used to test the cable test device's standard current level as well as the cable's fire resistance and waterproofness.

Standard:

• IEC 60332-3-10

• UL1685

• EN 50399 

• GB/T 18380.31

• IEC 60332-3 :Test on Electric cables under fire conditions 

part 3 : Test on bunched wires or cables 

• KS C IEC 60332-3-21 : Category A F/R 

• KS C IEC 60332-3-22 : Category A 

• KS C IEC 60332-3-23 : Category B 

• KS C IEC 60332-3-24 : Category C 

• KS C IEC 60332-3-25 : Category D

Specification:
Size	1,000(w) × 2,000(D) × 4,000(H)
Power	220 V AC, 60 Hz, 10 A
Weight	About 500kg
Auxiliaries	Propane Gas Valve System, Ignition System

Case Features:

1, Stainlesssteel test box the size of 1,000 ± 100 (W) x 2,000 ± 100 (D) x 4,000 ± 100 (H)mm. Interior surface of the case than the high ground, and the rear sidecovered with insulation material.

2,With a standardstainless steel ladder, based on ladders GB / T18380.31 requirements;

3, Alternate sample frame 2;

4, Ladders made of stainless steel; corrosion resistant; easy to clean;

5,In the lower part of the cabinet,from a position in front of the housing 150 ± 10mm has a 800 ± 20 (W) × 400 ±10 (D) of the air intake.

6, The inside of thebox is mounted thermocouple type K thermocouples, 2mm in diameter

7, The air flow insidethe combustion furnace can be stably controlled at (5000 ± 500) L / min.

Combustion System:

1,Burner: withtype propane gas burner, size 257mm × 4 5mm, opening a total of 242, three lines are arranged, respectively81,80,81 holes, hole diameter of 1.35mm, the distance between holes is 3.2 mm;

2, high-precisionball, control the gas off;

3, two meter: airflow and gas flow meter and control valve;

4, the front end ofthe combustion flame installation tester off tube to protect the propane gastempering, so as to ensure maximum safety on the specimen

5, combustion angle:horizontal; automatic ignition device; (20 degrees adjustable is optional)

6, the burner airand gas flow rate must be supplemented temperature and pressure, while manytraditional system ignores the impact of gas and air can be done automaticallyby a computer program the compensation process.

Control system:

1, PLC withlarge-screen touch screen control system;

2, Automaticignition system, automatic timing; Timing range 999min, accuracy 1s;

3, Experimental datais automatically stored, free inquiry;

4, 40 minutes, 1hour timekeeping reminders;

5, The specimenmounts with electric crane lift.

Device parameters:

1,The test box thesize of 1,000 ± 100 (W) x 2,000 ± 100 (D) x 4,000 ± 100 (H) mm

2,Anemometer accuracy 0.1m / s;

3, The air source anemometer range 8000L / min;outlet winds (5000 ± 500) L / min can be adjusted;

4,Gas: 95% purity oftechnical grade propane (customer)

5, the gas flow control: Under 100kpa, 20 ºC conditions

6,the combustion air supply: Propane (or LPG).

Specification:

1, Size of chamber :1,165 (W) × 2,165 (D) × 4,350 (H) mm

2, Console Size: 600 (W) × 750 (D) × 1,600 (H) mm

3, Power:AC 220V, 50 / 60hz, 15A

4, Weight:1,500kg