Civil Engineering Asphalt Ductility Tester Tensile Tester Bitumen Ductility Testing Apparatus

• Customization: Available
• After-sales Service: Lifetime Technical Support
• Warranty: 1year
• Model NO.: GD-4508C
• Max Diameter of Workpiece: >3200mm
• Mass Scope of Workpiece: <900kg
• Type: Tensile Testing Machine
• Maxcapacity: <1000KN
• Accuracy Grade: 0.5
• Load Way: Electronic Load
• Loading Method: Dynamic Load
• Display: Digital
• Control: Manual Control
• Weight: 0-100Kg
• Power Source: AC220V
• Oil Cylinder Position: Top
• Apparatus: Bitumen Ductility Testing Apparatus
• Function: Bitumen Ductilometer ASTM D113
• Device: Ductilometer Ductility ASTM D113
• Testee: Bitumen, Bituminous Materials, Asphalt
• Measurement Distance: 1.5m(+-10mm)
• Heating Mode: Electric Heater
• Liquid Circulation: by Magnet Circulat
• Tensile Speed: 10mm/Min and 50mm/Min, Two Grades
• Measurement Accuracy: +-1 mm
• Delivery Time: 10 Working Days(If Urgent, We Can Push)
• Transport Package: Standard Wooden Case for Determine Ductility of Bi
• Specification: 2365mm*520mm*1000mm
• Trademark: GOLD
• Origin: Chongqing of China
• HS Code: 9031809090
• Production Capacity: 100PCS/Mon

Product Description

Bitumen Ductility Testing Apparatus

Significance of Ductility Test of Bitumen:
>>> Bitumen Ductility test apparatus is used to Determine petroleum asphalt under the predetermined conditions and in certain temperature, at a certain speed stretch to fracture length,called petroleum asphalt ductility, expressed in cm.
>>> Ductility Test Apparatus conducts ductility tests of bituminous materials to measure the elongation of a binder specimen before failure. The ends of a molded specimen are pulled apart in a liquid-filled trough at a specified speed and temperature.
>>> The ductility test of the bitumen sample is one of the important tests of bitumen to be conducted before road construction.
>>> The bituminous binder used in the pavement should be ductile enough to take up the deformations acting upon it without exceeding the deflection limit. Ductile bitumen can form a thin ductile film around the aggregate particles. Thus, it does not crack at low temperatures. However, the films of brittle bitumen are not ductile and cracks may easily develop in lower temperatures.
Features:
1.  Bitumen Ductility test apparatus adopts humanized design philosophy. There is no leading screw, lead rail or other components in the test trough. The sample can be easily installed in and the maximum measurement distance can reach 1.5m.
2.  Bitumen Ductility test apparatus adopts innovative transmission design. The stretching is stable and synchronous. There is no tremble and the speed is uniform.
3.  Three specimens. Suitable to the test standard for asphalt ductility.
4.  The specimen can return and positioning automatically after the determination.
5.  Light-touch panel. Water-proof. 
 
Specifications:

Product name	Gd-4508c Bitumen Ductility test apparatus
Power supply	AC220V(-5%~+10%),50Hz
Measuring range	1.5m(±10mm)
Heating mode	Electrical heating
Heating power	3000W
Bath liquid circulation	Magnet pump
Temperature range	5ºC~49ºC, adjustable,  Digital display, resolution 0.01ºC
Temperature accuracy	±0.1ºC
Speed	10 mm/min or 50mm/min. Two grades
Measuring accuracy	±1mm
Ambient temperature	-10ºC~+35ºC
RH	≤85%
Overall dimension	2365mm×520mm×1000mm
Maximum power consumption	4100W

Procedure for ductility test of bitumen
1. The bitumen sample is heated to bring it in a fluid state and poured in the briquette assembly and placed on a brass plate.
2. The whole equipment including the bitumen briquette along with brass plate is allowed to cool in the air.
3. A hot knife is used to cut the excess bitumen and also the surface is leveled with the help of a hot knife.
4. The whole assembly now is kept in a bath maintained at 27 oC for about 85 to 95 minutes.
5. The side of the mould removed, the clips hooked on the machine, and the pointer adjusted to zero value or initial reading noted.
6. Now the clips are pulled apart horizontally at the rate of 50 mm per minute and the distance up to the point of the breaking of a thread is noted. This distance in cms gives the value of the ductility of bitumen.
7. The ductility of bitumen may vary from 5 to over 100 for different bitumen grades, but for satisfactory performance, it should not be less than 50.
8. The ductility of bitumen is dependent upon pouring temperature, dimensions of the briquette, test temperature, the rate of pulling, etc.

Related Products:

Parameter	GD-4508C	GD-4508G(DUAL-PATH)
Auto./Manual	Semi-auto	Automatic
Measuring range	1.5m±10mm	2m
Temperature range	5~50ºC	5~50ºC
Speed	10mm/min, 50mm/min	10~50mm/min,adjustable
Force measurement	no	yes
PC communication	no	yes
size	2365*520*1000mm	2365*520*1000mm

Company  Information:

Chongqing Gold Mechanical & Electrical Equipment Co., Ltd.

We mainly design and manufacture the petroleum testing instrument  
After several years' development, our products have become high intelligent and wide coverage. And our company has become one of the leading manufacturer of petroleum testing instrument .
We have persisted in the business idea of "integrity basis and quality first" for the stable and constant development. We're always making efforts to develop together with customers from both domestic and abroad on the basis of reciprocity. Client, Quality and Service are our supreme target!

Contact Us:
If you have interest, please feel free to contact with me:
Chongqing Gold Mechanical&Electrical Equipment Co., Ltd
website: chinainstrument.en.made-in-china.com