0.1~10000mg/L ASTM D5453 Total Sulfur in Diesel and Liquid Fuels by Ultraviolet Fluorescence

• Customization: Available
• After-sales Service: Lifetime Technical Support
• Warranty: 1 Year
• Model NO.: GD-5453
• Max Diameter of Workpiece: <500mm
• Mass Scope of Workpiece: <900kg
• Type: Sulfur-in-Oil Analyzer
• Maxcapacity: <1000KN
• Accuracy Grade: 0.5
• Load Way: Electronic Load
• Loading Method: Dynamic Load
• Display: Digital
• Control: Computer Control
• Weight: 0-100Kg
• Power Source: AC220V
• Test Standard: UV Fluorescence ASTM D5453
• Total Sulfur in Diesel and Liquid Fuels: Ultra Low Sulphur Diesel Tester
• ASTM D5453 Sulfur Content: Trace-Level Total Sulfur Determination
• Measuring Range: 0.1~10000mg/L
• Power Supply: AC220V±22V, 50Hz±0.5Hz, 1500 W
• Sample Types: Solid, Gas and Liquid
• Method of Determination: Ultraviolet Fluorescence Method(S)
• Sample Detection Time: About 2 Minutes
• Weights: Host: 20kg; Temp Controller: 40kg
• Transport Package: Wooden Case
• Specification: Conforms to ASTM D5453
• Trademark: GOLD
• Origin: Made in China
• HS Code: 9031809090
• Production Capacity: 100sets/Month

Product Description

Laboratory 0.1~10000mg/L ASTM D5453 Total Sulfur in Diesel and Liquid Fuels
by Ultraviolet Fluorescence

Product Description

Product description:
Total analysis of the Sulfur content in hydrocarbons by combustion and UV fluorescence detection has become the orthodox method to characterize feedstock, intermediate streams and finished hydrocarbon products due to its linearity, sensitivity, ruggedness and dynamic range.

Application:
The instrument is suitable for the determination of total sulfur content of paraffin oil, diesel, kerosene, gasoline, lubricating oil, fuel oil, liquefied gas and natural gas, as well as other oil products, chemical raw materials and finished products.

Standards:
SH/T 0689-2000 Determination of total sulfur content of light hydrocarbons and engine fuels and other oils (Ultraviolet fluorescence method)
ASTM D5453 The standard test method for the determination of the total sulfur content of light hydrocarbon, spark ignition engine fuel, diesel engine oil and engine oil.

Product Parameters

 

Sample types: Solid, Gas and Liquid
Method of determination: Ultraviolet fluorescence method (S)
Sample injection quantity: Solid: 1-90mg; Liquid: 2-50μL; Gas: 1-50mL
Measuring range: 0.1~10000mg/L (High concentration should be diluted)              
Temperature range: room temp~1300ºC
Temperature-controlled precision: ±1ºC
Sample detection time: about 2 minutes
Gas source requirements: High-purity argon: above 99.9%
                                               High purity oxygen: above 99.9%
Power supply: AC220V±22V, 50Hz±0.5Hz, 1500 W
Dimension: Host: 305(W)×460(D)×440(H)mm
                     Temp controller: 550(W)×460(D)×440(H)mm
Weight: Host: 20kg; Temp controller: 40kg
Measuring accuracy:

Concentration values (ppm)	Injection quantity (µL)	RSD (%)
0.2	20	25
5	10	10
50	10	5
100	10	3
5000	10	3

Main Structure

Related products

Item	GD-380B Sulfur Content Tester	GD-4294C X-ray Fluorescence Sulfur-in-Oil Analyzer	GD-5453 Ultraviolet Fluorescence Sulfur-in-Oil Analyzer	GD-0253A Coulometric Sulfur Analyzer
Standards	ASTM D1266 Lamp method	ASTM D4294  X-ray Fluorescence (XRF)	ISO 20846,ASTM D5453,ASTM D4629,ASTM D5762,ASTM D6069 Ultraviolet Fluorescence method	ASTM D3120, ASTM D3246
Application	Used to determine the sulfur content in light oils(such as gasoline,kerosene) which the Reid vapor pressure is not higher than 600mmHg	Used to detect diesel,naphath,kerosene,residual oil,lubricant base oil,hydraulic oil,jet fuel,crude oil,motor gasoline,and the sulfur content of other distillate hydrocarbon.	Suitable to determine the total sulfur content of liquid state hydrocarbon at boiling range 25-400°C and the viscosity 0.2-10mm2/s at room temperature.Used in total sulfur content range 1.0-8000mg/kg naphth,distillate oil,engine fuel and other oils	Suitable to determine the light petroleum products at the boiling range 40-310°C.The sulfur content range 0.5-1000ppm.If above 1000ppm sulfur content sample,detecting it after attenuation.Not used in more than 10 times sulfur content of halogen content,more 10% total nitrogen content,heavy metal content more than 500ppm sample

Main Technical Features

The instrument is used to determine the total sulfur content by ultraviolet fluorescence method. It improves the ability of anti-jamming, and avoids the complicated operation of titration pool and factors of instability which used Coulometry. So the sensitivity of the instrument is greatly improved. The key components of the system adopt imported components to protect the detector light leakage and steam leakage and makes the machine has a reliable guarantee. 

Detailed Photos

Packaging & Shipping

Our product packaging has been proven over the long term and we usually have plywood boxes or wooden case with trays. We will arrange the appropriate packaging according to the weight and size of the goods. Of course, you can also choose the packaging form.

Shipping method	Note
Express	very convenient, don't need to clearance or pick-up
By air	Airport to airport,you need to do the customs clearance and pick up  thegoods at your local airport, which you can have a local shipping agent to do for you.
By sea	Port to port and you need to do the customs  clearance and pick-up the goods at your local port, which you can have a local shipping agent to do for you.

Contact us

Welcome to contact us talk about details if you are interested in 0.1~10000mg/L ASTM D5453 Total Sulfur in Diesel and Liquid Fuels by Ultraviolet Fluorescence.If you want to know more information,Don't hesitation, welcome your inquiry!Price can be negotiated! 
Website: chinainstrument.en.made-in-china.com