| Customization: | Available |
|---|---|
| Certification: | ISO9001, CE |
| Application: | Transformer Oil, Insulating Oil |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Introduction:
Transformer oil is very important to reliability, performance and lifetime of transformer. The oil should be free from moisture,dissolved gases, particles, etc. Even some new oils may require treatment to acceptable level before injecting into the transformer;
Our 3000L/H Double Satge High Vacuum Transformer oil purification machine Insulating Oil Recycling Machine is professional for treatment of transformer oil, it can efficiently remove water, gases, acid, particles, etc. from the oil.
With the advantages of high working vacuum, high filtration speed, oil quality protection, the filter advanced the oil treatment technique and equipment performance and once can raise the puncture voltage up to over 35V.
3000L/H Double Satge High Vacuum Transformer oil purification machine Insulating Oil Recycling Machine can be installed by sealed regular or movable with a trailer, so it is suitable to treat oil, fill oil in vacuum chamber and circulating dry hot-oil when large transformer is being installed and overhauled.
Features:
3000L/H Double Satge High Vacuum Transformer oil purification machine Insulating Oil Recycling Machine
One pot with two-stage vacuum-segregating space, it comes into being different pressure so as to keep oil line balance between two stages.
Imported vacuum-pump from Europe has preceding level in the world and high air pump speed guarantee high working vacuity.
New technology of vacuum-segregating adopts particular spinning disk and stainless steel machine with dehydration and air pump
Using new type of heating equipment which can reduce heating burthen and extend oil life.
Oil level control adopts photoelectric way of which the main components are imported from Switzerland.
Customers can choose equipment equipped with all or partly imported components.
It's equipped with filter assemblies imported from Italy.
All pumps must be airproofed by our factory, moreover running without noise and leakage. extended oil life.
| Parameters | Unit | 1.8KY | 3KY | 6KY | 9KY | 12KY | 18KY |
| Flow Rate | L/H | 1800 | 3000 | 6000 | 9000 | 12000 | 18000 |
| Working Vacuity | ≤80Pa | ||||||
| Working Pressure | ≤0.5Mpa | ||||||
| Temperature Range | 45-65 ºC | ||||||
| Power Supply | 50Hz 380V 3 Phase 4-Wire or as request | ||||||
| Total Power | KW | 16 | 36 | 70 | 100 | 150 | 200 |
| Inlet/Outlet Diameter | mm | 20/20 | 25/25 | 32/32 | 40/40 | 50/50 | 65/65 |
| Breakdown Voltage | KV | 70-75 |
| Water Content | ppm | 3~5 |
| Gas Content | % | ≤0.2 |
| Filtering Accuracy | µm | 1~3 |
){kind=link}