Vertical Flame Spread Tester for Single Cable and Wire, IEC 60332

• After-sales Service: All Life Technical Support
• Warranty: 12 Months
• Product Name: Vertical Flame Spread Tester for Single Cable
• Standard: IEC 60332-1-1,2,3
• Operating Voltage: AC220 V, 50Hz
• Ambient Temperature: Room Temperature ~ 40 ºC
• Model NO.: GD-IEC60332
• Gas Pressure: 0.1MPa
• Gas Purity: Propane> 95%; Compressed Air
• Timing Accuracy: 0.1s
• Size: 600(W)*450(D)*1250(H)mm
• Power: AC 220V, 50/60Hz, 3A
• Weight: 60kg
• Transport Package: Plywood Case
• Trademark: GOLD
• Origin: Chongqing China(Mainland)
• HS Code: 9031809090
• Production Capacity: 500 Sets/ Year

Product Description

IEC 60332-1 Flame Propagation Test for Single Cable

Introduction:   

Wire and Cable is the second-largest industry. Single wire and cable vertical burning tester is the most widely used and low-cost cable fire performance test equipment. Single wire or cable burning tester meets the national standard GB /T18380.11-2008 / IEC60332-1-1: 2004 requirement. It is to test the flame retardant insulation layer under fire conditions applicable for testing wire and cable in overheating, over-current, and other non-normal states. It can be used for vertical or fiber optic wire and cable flame spread tests, and test combustion conditions of Dettol matter under fire conditions.

Standard:   

  IEC 60332-1-1,2,3
  EN 50086-1-1994
  GBT 18380.11,12-2008 

 

Main features:   

1.  Touch screen intelligent control system; English user interface.

2.  Automatic ignition system, automatic timing, automatic data storage.

3.  The test section and the control section is combined design in one box for operation.

4.  Stainless steel test box, the internal cavity size: height 1200mm, width 300mm, depth of 450mm.

5.  A pre-mixed burner, with an inner diameter of ¢ 12 ± 0.5mm, and a length is 100mm. 1KW hybrid standard burner, which provides an accurate test fire source.

6.  The flame burning applied time and hold time can range from 0 to 99 minutes99 seconds range adjustment. Automatic control of the testing process.

7.  Imported needle valve precisely adjusts the flame height, according to standards, the blue flame height is 50mm ~ 60mm, total height 170mm ~ 190mm.

8.  The gas flow rate is controlled by the needle valve.

9.  Equipped with a flame height caliper.

10.  Equipped with a gas flow meter and pressure regulator; automatic ignition.

11.  The torch angle:  45 °, 0 ° adjustable.

12.  The flame calibration device is optional.

 

Specifications:   

Operating voltage	AC220 V ± 10V 50HZ
Ambient temperature	room temperature ~ 40 ºC
Gas Pressure	0.1MPa
Gas purity	Propane> 95%; compressed air
Timing Accuracy	0.1s
Model	GD-IEC60332
Size	600(W)×450(D)×1250(H)mm
Power	AC 220V, 50/60Hz, 3A
Weight	60kg
Manual	Provide