China Manufacture Flammability Analyzer IEC 60332-1 for Single Wire

• After-sales Service: All Life Technical Supports
• Warranty: 12 Months
• Item Name: China Manufacture Flammability Analyzer IEC 60332
• Standard: UL 94; IEC 60332-1, 2, 3
• Size: 1, 510(W) * 630(D) *1, 400(H)
• Power: 220 V AC, 60 Hz, 1 a
• Model NO.: GD60332-1
• Weight: 60 Kg
• Manual: Supplied
• Utilities: Remote Controller, Methane Gas
• Vent & Exhaust Fan: Open/Close, 1.4 M3/Min
• 0-45 Degree Angle Burner: Convenient Adjustment
• Precise Control of The Flame: Height 18- 22 mm
• The Air and Gas Flow: Can Be Adjusted by The Burner
• United States Imports Bunsen Burner: Tube Length 90- 110 mm
• Overall Size of The Chamber: L 1200mm * W 600mm* H 1300mm
• The Stainless Steel Ruler Precision: 0.5 mm
• Transport Package: Standard Wooden Case
• Trademark: GOLD
• Origin: Chongqing China(Mainland)
• HS Code: 9031809090
• Production Capacity: 500 Sets/ Year

Product Description

China Manufacture Flammability Analyzer IEC 60332-1 for Single Wire


 

Introduction:

Wire and Cable is the second-largest industry. China Manufacture Flammability Analyzer IEC 60332-1 for Single Wire is the most widely used and low cost of cable fire performance test equipment; China Manufacture Flammability Analyzer IEC 60332-1 for Single Wire meets the national standard GB /T18380.11-2008 / IEC60332-1-1: 2004 requirement. It is to test flame retardant insulation layer under fire conditions applicable for testing wire and cable in overheating, over-current and another non-normal state. It can be used for vertical or fiber optic wire and cable flame spread test, and test combustion conditions of Dettol matter under fire conditions.

 

Standard:

IEC 60332-1-1,2,3
EN 50086-1-1994
GBT 18380.11,12-2008 

 

Main features:

• Touch screen intelligent control system; English user interface;

• Automatic ignition system, automatic timing, automatic data storage;

• The test section and the control section is combined design in one box for operation;

• Stainless steel test box, the internal cavity size: height 1200mm, width 300mm, depth of 450mm;

• A pre-mixed burner, an inner diameter of ¢ 12 ± 0.5mm, the length is 100mm. 1KW hybrid standard burner,which provides accurate test fire source;

• The flame burning applied time and hold time can range from 0 to 99 minutes99 seconds range adjustment. Automatic control of the testing process;

• Imported needle valve precisely adjust the flame height, according to standards, the blue flame height is 50mm ~ 60mm, total height 170mm ~ 190mm;

• The gas flow rate is controlled by the needle valve;

• Equipped with a flame height calliper;

• Equipped with a gas flow meter and pressure regulator; automatic ignition;

• The torch angle:  45 °, 0 ° adjustable;

• The flame calibration device is optional.

 

Specification:

Product name	China Manufacture Flammability Analyzer IEC 60332-1 for Single Wire
Operating voltage	AC220 V ± 10V 50HZ
Ambient temperature	room temperature ~ 40 ºC
Gas Pressure	0.1MPa
Gas purity	Propane> 95%; compressed air
Timing Accuracy	0.1s
Size	600(W)×450(D)×1250(H)mm
Power	AC 220V, 50/60Hz, 3A
Weight	60kg
Manual	Provide

 

Our Services:

*Consulting support

*Sample testing support

*Factory Visiting

*Training support

*Installation support

*24 Hours &7 days service