| Customization: | Available |
|---|---|
| After-sales Service: | All Life Technical Supports |
| Warranty: | 12 Months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
ISO1182 Micro-control Building Material Non-Combustibility Tester
Introduction:
Non-Combustibility Tester measures the incombustibility and combustibility of uniform building material and non-uniform building material of actual element.
The evaluations (results) are rising temperature in the furnace, basic mass loss and ignition of the specimen.
It fully satisfies KS F 2271, KS F ISO 1182, and ISO 1182 as international standards in the same time.
This equipment uses a module-type temperature controller to be stable over 60 minutes in the furnace condition of 750±5ºC and meets precise test results.
Another advantage is the automatic up-down specimen movement device for accurate results as well as a user-friendly process. Thus, it doesn't matter who is test-users.
RS 232C communication and Data Acquisition Board can be an accurate Interface of test values, so the user can test the whole function and test by PC easily and automatically.
Application:
* Building Materials
* Rail
* IMO
Standards:
ISO 1182
- Reaction to fire test for building material---Non-combustibility test
BS 476-4
- Fire Tests on Building Materials and Structures.. Part 4: Non-Combustibility Test for Materials
BS 476-11
- Fire tests on building materials and structures - Part 11: Method for assessing the heat emission from building materials.
KS F ISO 1182
- Method of a non-combustibility test of building products
KS F 2271
- Testing method for incombustibility of internal material and elements of building
Feature:
Single Zone Furnace operable at up to 900 ºC with the NIKROTHAL Ribbon Heater.
750±5ºC temperature auto control with TPR.
Furnace facilitating maintenance and replacement.
Up/down automatic moving system for correct positioning of the test sample and user's convenience.
Mirror to observe the ignition quality of the test sample.
RS 232C communication and DAQ Board-adopted interface.
Auto testing by DAQ Board and PC.
Alarm temperature-based over current shut-off system for user's safety.
Software (Non-Comb 2005) to print out reports based on exact data results and each standard.
Test Result:
* Mass Loss(g) and Rate(%)
* Ignition Time(s) and Sustained Flaming(s)
* Initial & Maximum Furnace Temperature(ºC)
* Final Furnace Temperature(ºC)
* Maximum Specimen Center Temperature(ºC)
* Final Specimen Center Temperature(ºC)
* Furnace Temperature Rise(ºC)
* Specimen Center & Surface Temperature Rise(ºC)
* Differential Test Result by Standards
(ISO 1182:1990, KS F ISO 1182: 2004, IMO FTPC Pt.1: 1998, KS F 2271: 1998)
Product Image:
Specifications:
| Product name | Non-combustibility Tester for Building Materials |
| Standard | ISO 1182, BS 476-4, BS 476-11, ASTM E 136 |
| Size | 400mm(w) × 400mm(D) × 1,270mm(H) |
| Power | 220 V AC, 60 Hz, 10 A |
| Weight | about 40kg |
| Control unit | 530mm(w) × 270mm(D) × 280mm(H) |
| Manual | supplied |
| Utilities | Personal Computer and PC Printer |
){kind=link}