ASTM E648 Floor Material Radiation Measurement Device

• Max Diameter of Workpiece: Critical Radiant Flux Tester
• Mass Scope of Workpiece: <900kg
• Type: Material Testing Machine
• Maxcapacity: <1000KN
• Accuracy Grade: 0.5
• Load Way: Electronic Load
• Model NO.: GD-003
• Loading Method: Dynamic Load
• Display: Digital
• Control: Computer Control
• Weight: 100-500Kg
• Power Source: AC220V
• Oil Cylinder Position: Na
• Item Name: ISO9239-2 Flooring Flame Spread Tester
• Name: Floor Covering System Critical Radiant Flux Tester
• Application I: Test Critical Radiant Flux of Floor Coverings
• Application II: Determine Flame Spread at a Heat Flux Level
• Test Standards: ISO9239-1, ISO9239-2, ASTM E648, ASTM E970, Nfpa25
• Heat Flux Level: 25kw/M2
• Size: (W)1, 900mm * (D)750mm * (H)2, 120mm
• Power Supply: 220V, 50Hz
• Warranty: 1 Year
• After Sale Service: Supply Installation and Commissioning Service
• Transport Package: Packed in Veneer Case
• Specification: Refer to the specifications
• Trademark: GOLD
• Origin: Chongqing, China
• HS Code: 9031809090
• Production Capacity: 100 Set/Month

Product Description

ASTM E648 Floor Material Radiation Measurement Device
Introduction:

1. ASTM E648 Floor material radiation measurement deviceadopts test method of formal reflected spread of flame on flooring material back-draft condition when fire on building happened flame at compartment or room adjacent, or high temperature gas radiated to flooring surface a hot radiation heat accumulated at upper of midway during a fire at an early growing step.
2. Specimen is located at down horizon of 30 degree sloped gas radiation panel per horizon surface.
3. Pilot flame as ignition resource put a part edge of specimen on high temperature side. This equipment record ignition time by spark, moving time which flame horizontal pass by specimen of length.

 
Standard:

1. ISO 9239-1: Reaction to Fire Tests for Floorings - Part 1 : Determination of the Burning Behavior Using a Radiant Heat Source;
2. ISO 9239-2: Reaction to Fire Tests for Floorings - Part 2 : Determination of Flame Spread at a Heat Flux Level of 25kw/m2;
3. ASTM E 648 : Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source;
4. ASTM E 970: Standard Test Method for Critical Radiant Flux of Exposed at Attic Floor Insulation Using a Radiant Heat Energy Source;
5. NFPA 253: Standard Method of Test for Critical Radiant Flux of Floor Covering Systems Using a Radiant Heat Energy Source (National Fire Codes, Vol.6);

 
Specifications:

No.	Item Name	ASTM E648 Floor material radiation measurement device
1	Steel frame chamber	1400(W)×500(D)×2,220(H)
		Calcium silicate insulation board
		Observation window
2	Sliding platform for loading of the test specimen
3	Radiant Panel	300±10mm × 450±10mm (30°, Porous cement)
		Auto moving ignition burner
		Scale for check flame spread
4	K-type thermocouples	Range, Ambient ~ 1,500ºC
5	Stainless steel sample holders
6	Dummy calibration panel holders for measuring heat fluxmeter
7	Pyrometer for measuring radiant panel temperature
8	Exhaust duct & hood	Ø 300 / (W)1,700 x (D)1,200 x (H)400 mm
9	Heat Flux Meter	Range: 0 ~ 100 ± 10 kw/m2
		Surface emissivity: ε=0.95± 0.05
10	DAQ(Data Acquisition) system	NI-PCI DAQ Board
		16 Bit wide gain rage, Analog and Digital I/O Board
		Three A/D trigger modes
11	Size	(W)1,900X (D)750 X (H)2,120 mm
12	Power Supply	220VAC, 60Hz, 10A
13	Weight	300kg
14	Utilities	Bottled propane gas, Air compressor(5HP)

 
Product Show:



Our Service:
Presell Service:


After-sale Service:


Contact Us: