Imo Radiant Panel Flame Spread Tester ISO 5658-2

• Customization: Available
• After-sales Service: All Life Technical Supports
• Warranty: 12 Months
• Model NO.: GD-ISO5658
• Standard: ISO 5658-2
• Size: 2200 mm (W) X 2120 mm (H) X 1100 mm(D)
• Power: 220 V, 10 AMPS
• Weight: 128kg
• Manual: Provided
• Utilities: Propane Gas, Methane Gas, Acetylene Gas, Compresse
• Transport Package: Plywood Case
• Trademark: GOLD
• Origin: Chongqing China(Mainland)
• HS Code: 9031809090
• Production Capacity: 500 Sets/ Year

Product Description

IMO Radiant Panel Flame Spread Tester ISO 5658-2

Introduction:
The IMO Thermal Radiation Flame Propagation Tester is used to measure the combustion characteristics of building materials, high-speed train materials, and marine materials. The flame propagation speed ignition heat and total heat release are measured by distance and CEF (critical thermal radiation flow). It is used to test the transverse flame propagation performance of building products, and the flame propagation performance/flame spread speed can be used to evaluate the fire retardant properties of materials.
This test method is used to evaluate the combustion characteristics of vertically mounted test objects according to ISO 5658-2 and IMO Res.653. At the same time, it satisfies the GB/T 28752-2012 flame spread test method on the vertical surface. The test object is exposed to the appropriate heat sink area given by the heat sink gas combustion type, and then the signal value is measured in mV using a calibrated thermocouple when combustion occurs. In addition, the ignition time is also recorded and the flame burning time of the object to be measured is recorded in accordance with the distance of the test object, and the spread speed of the flame is also recorded. Other test items include ignition heat (MJ/m2), continuous combustion heat (MJ/m2), critical heat radiation flow (kW/m2), average heat for continuous combustion, and total heat dissipation (kW).

Standard:   
ISO 5658-2: Reaction to fire tests - Spread of flame - Part 2: Lateral spread on building and transport products in a vertical configuration
IMO Res.A.653(16): Surface materials for bulkheads and ceilings and similar exposed surfaces, floor coverings
ASTM E1317: Standard Test Method for Flammability of Marine Surface Finishes
GB/T 28752-2012: Test method for lateral spread of flame on building and transport products in a vertical configuration

Application
Building Materials
Rail
IMO

Features:

1. All control systems are explosion-proof.
2. Air Cylinder type of Pilot Flame Burner allows the flame impingement test method based on IMO to be automatically performed.
3. Double grid to see the spread of flame length as well as enlarged Restrict View Mirror for easy observation.
4. DAQ Program for applying a spread of flame length and combustion characteristics to image storage.
5. 19" Analysis Rack for measuring spread rate of flame, critical flux, and heat release rate.
6. IMO Program is available for controlling the Air Blower to facilitate change in the amount of combustion-heat in Radiant Panel Calibration (for measuring heat release rate by each section of the radiant panel.
7. Program for blocking gas supply in failure of ignition in the radiant panel, which Flame Relay System detects.
8. Rail for easily measuring heat flux of radiant panel at an interval of 50mm.
9. IMO Program to facilitate all calibrations and tests as well as to print results by standards (IMO, ISO).
10. Radiant panel temperature controller: Equipment to prevent flame back toward the back side of the Radiant panel, check the internal temperature of the radiant panel, and automatically block gas sol. v/v in case of flame back-flow.
11. MFC (Mass Flow Controller) to easily measure the heat amount of methane gas in measuring critical heat flux.
12. Explosion-proof options of all control systems for safety in combustion in the radiant panel as well as the Check-Valve and its Gas shut-off valve (Solenoid Valve) to prevent back-flow in the gas line.
13. Camcorder to observe and save test conditions in a program during tests.

Product Image:


 

Specification:

Size	2200 mm (W) x 2120 mm (H) x 1100 mm(D)
Power supply	220 V, 10 Amps
Weight	128kg
Manual	Provided
Utilities	Propane Gas, Methane Gas, Acetylene Gas, Compressed Air