| Customization: | Available |
|---|---|
| After-sales Service: | Technical Support,Online Service |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
IEC 60332-3-10 bunched Cable Vertical Flame Spread Tester for lab Fire testing equipment EN 50399
Product Description:
What can we know about this tester?
IEC 60332 Tester for vertical flame spread of bundled wires and cables installed vertically is designed and manufactured according to the standard IEC60332-3--10; 2018 "Vertical Flame Propagation Test of Vertically Installed Bunched Wires or Cables", and is used to evaluate the vertically installed bundled wires and cables. The ability to inhibit the vertical spread of flame under certain conditions.
The testing machine is composed of combustion box, control cabinet, auxiliary hoisting device, auxiliary water spray fire extinguishing pipe, water spray dust removal tower, plasma filter box, centrifugal exhaust fan and flue pipe, etc.
components. The control system is composed of temperature and pressure sensors + mass flowmeter + computer software to complete the test parameters such as flow control, temperature display, air source pressure display, air intake control, and test time control.
We can meet these standard following:
(1)GB/T18380. 31-2022, IEC60332-3-10-2018 "Cables and cables under flame conditions burning test part 31: test for vertical flame spread of bundled wires and cables installed vertically Test report test device"
(2)GB/T18380.32-2022/IEC60332-3-21: 2018 "Cables and optical cables under flame conditions combustion test part 32: test for vertical flame spread of bundled wires and cables installed vertically Test A F/R Class
(3)GB/T18380. 33-2022/IEC60332-3-22 : 2018 "Cables and cables under flame conditions burning test part 33: test for vertical flame spread of bundled wires and cables installed vertically Class A"
The specification we can explain:
1)A vertical box with internal width (1000+20) mm*depth (2000+20) mm*height (4000+20) m. The inner and outer layers of the test box are riveted by SUS304 brushed stainless steel plate
2)It is connected to the frame, and at the same time, mineral fiber cotton with a thickness of 65mm is filled between the two steel plates, so that the thermal conductivity of the rear wall and side wall of the box is 0.7w.m-2.K-1;
3) Air intake hole at the bottom of the cabinet: size (800+10) mm* (400+10) mm; position is 150 ± 10) mm from the front wall;
4)The air outlet on the top of the box: size (1000+10) mm* (300+10) m; the position fits the rear edge;
5) Cabinet inner steel plate: 1.5mm thick SUS304 stainless steel;
6)Outer steel plate of the box: 1.0mm thick SUS304 stainless steel;
7)The frame of the box body is made of stainless steel square pass overall welded structure, which is stable and does not deform;
8)Temperature detection of the cabinet: medium 5*50mm OMEGA temperature sensor;
9)The size of the smoke hood at the smoke outlet: 1500*1000mm;
10)Dimensions from the bottom edge of the smoke collecting hood to the top of the box: 300±10mm;
11)The weight of the box is about 1.2 tons;Equipment structure:
1)IEC 60332 Tester for vertical flame spread of bundled wires and cables installed vertically consists of a stainless steel integrated combustion box, a control cabinet, an electric control cabinet for air volume and wind speed, a hoist bracket, a spray pipeline, a trolley for a blowtorch, a steel ladder, a steel ladder bracket for auxiliary sample installation, and a top.
2)Composed of main components such as smoke collecting hood and spiral smoke pipe;
(The D combustion box is an embedded frame type, which meets the requirements of handling, hoisting and long-term use without deformation;
3)There is a directional pulley at one end of the steel ladder, which is convenient for the steel ladder to move close to the ground when lifting;
4)Equipped with two steel ladder support frames, it is convenient for personnel to install the samples with a comfortable body posture, and universal wheels are installed at the bottom of the support for easy movement;
5)The closed door of the box is equipped with multi-layer vacuum tempered glass windows, and the height of the windows meets the observation needs of human eyes;
6)There is a mesh plate at the air inlet at the bottom of the box, which can support the trolley and meet the requirements of the uniformity of the air intake;
Packaging & Shipping:
Wooden packing for IEC 60332-3-10 bunched Cable Vertical Flame Spread TesterFAQ:
1. who are we?
We are based in Chongqing, China, start from 2009,sell to Domestic Market(30.00%),Mid East(20.00%),Africa(15.00%),Southeast Asia(10.00%),Western Europe(5.00%),Eastern Asia(5.00%),Eastern Europe(5.00%),South America(5.00%),North America(5.00%). There are total about 51-100 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Fire testing equipment,Petroleum Testing Equipment,Petroleum Laboratory Equipment,Asphalt Testing Equipment,Bituminous Mixture Testing Equipment,Road Lab Equipment
4. why should you buy from us not from other suppliers?
As a leading manufacturer of Petroleum Testing Equipment and Road Lab Equipment in China, we've engaged in the field for 20 years, with rich experience in related projects. Client, Quality and Service are always our supreme target!
5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,CIP,CPT,DDP,DDU,DAF;
Accepted Payment Currency:USD,EUR,JPY,CAD,AUD,HKD,GBP,CNY,CHF;
Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,Credit Card,PayPal,Western Union,Cash,Escrow;
Language Spoken:English,Chinese,Spanish,Portuguese,German
){kind=link}