Touch Screen Single Cable Propagation Tester IEC 60332

• Customization: Available
• After-sales Service: All Life Technical Supports
• Warranty: 12 Months
• Model NO.: GD-IEC60332
• Product Name: Touch Screen Single Cable Propagation Tester
• Standard: IEC 60332-1, En 50086
• Material: Stainless Steel
• Operating Voltage: AC220 V +-10V 50Hz
• Ambient Temperature: Room Temperature ~ 40 Degree C
• Gas Pressure: 0.1MPa
• Gas Purity: Propane> 95%; Compressed Air
• Timing Accuracy: 0.1s
• Size: 600(W)*450(D)*1250(H)mm
• Power: AC 220V, 50/60Hz, 3A
• Weight: 60kg
• Manual: Provide
• Transport Package: Plywood Case
• Trademark: GOLD
• Origin: Chongqing China(Mainland)
• HS Code: 9031809090
• Production Capacity: 500 Sets/ Year

Product Description

Touch Screen Single Cable Propagation Tester IEC 60332

Introduction

Wire and Cable is the second-largest industry. Single wire and cable vertical burning tester are the most widely used and low-cost cable fire performance test equipment; Single wire or cable burning tester meets the national standard GB /T18380.11-2008 / IEC60332-1-1: 2004 requirement. It is to test the flame retardant insulation layer under fire conditions applicable for testing wire and cable in overheating, over-current, and other non-normal state. It can be used for vertical or fiber optic wire and cable flame spread tests, and test combustion conditions of Dettol matter under fire conditions.

Standard

IEC 60332-1-1,2,3
EN 50086-1-1994
GBT 18380.11,12-2008 

Main features

• Touch screen intelligent control system; English user interface;

• Automatic ignition system, automatic timing, automatic data storage;

• The test section and the control section are combined designs in one box for operation;

• Stainless steel test box, the internal cavity size: height 1200mm, width 300mm, depth of 450mm;

• A pre-mixed burner, with an inner diameter of ¢ 12 ± 0.5mm, and a length is 100mm. 1KW hybrid standard burner, which provides an accurate test fire source;

• The flame burning applied time and hold time can range from 0 to 99 minutes99 seconds range adjustment. Automatic control of the testing process.

• The imported needle valve precisely adjusts the flame height, according to standards, the blue flame height is 50mm ~ 60mm, total height is 170mm ~ 190mm

• The gas flow rate is controlled by a needle valve

• Equipped with a flame height caliper.

• Equipped with a gas flow meter and pressure regulator; automatic ignition.

• The torch angle is 45 °, 0 ° adjustable.

• The flame calibration device is optional.

  

Specifications
Operating voltage	AC220 V ± 10V 50HZ
Ambient temperature	room temperature ~ 40 ºC
Gas Pressure	0.1MPa
Gas purity	Propane> 95%; compressed air
Timing Accuracy	0.1s
Model	GD-IEC60332-1
Size	600(W)×450(D)×1250(H)mm
Power	AC 220V, 50/60Hz, 3A
Weight	60kg
Manual	Provide