Ring and Ball Softening Point of Bitumen Tester with 4 Sample Positioins

• Customization: Available
• After-sales Service: Lifetime Technical Support
• Warranty: 1 Year
• Model NO.: GD-2806H
• Max Diameter of Workpiece: <500mm
• Mass Scope of Workpiece: <900kg
• Type: Softening Point of Bitumen Tester
• Maxcapacity: <1000KN
• Accuracy Grade: 1
• Load Way: Electronic Load
• Loading Method: Dynamic Load
• Display: Digital
• Control: Computer Control
• Weight: 0-100Kg
• Power Source: AC220V
• Oil Cylinder Position: Under
• Temperature Resolution: 0.1c
• Test Samples: It Can Do Two Samples or Four Samples
• Heating Rate: It Will Be Adjusted to 5.0+/-0.5c/ Min
• Heating Power: 600 W
• Computer Port: RS-232c Communication Port
• Cubage of Beaker: 900ml
• Dimension: 400*300*490
• Delivery Time: 10 Working Days
• MOQ: 1 Set
• Power Supply: 220V
• Transport Package: Wooden Case
• Specification: conforms to ASTM D36
• Trademark: GOLD
• Origin: Chongqing of China
• HS Code: 9031809090
• Production Capacity: 100sets/Month

Product Description

Automatic Ring and Ball Test and Softening Point of Bitumen Tester with 4 Sample Positioins

Product Description

The ring and ball method is suitable for determining the softening point of asphalt materials (petroleum asphalt, coal tar pitch, polymer modified asphalt and emulsified asphalt evaporation residue, etc.) with a softening point of 30-157 °C. When the softening point is 30-80°C, use distilled water as the heating medium, and when the softening point is 80-157°C, use glycerin as the heating medium. The softening point of road petroleum asphalt cannot be higher than 80°C, but for some polymer modified asphalt, construction petroleum asphalt, etc., the softening point may be higher than 80°C, and the glycerin bath test should be used.

Procedure

1 Prepare two or four samples according to the requirements of the preparation work and place the samples in the sample ring.
2 Loosen the upper bracket fixing nut and gently lift the upper bracket upwards, turn it 180° and place it downwards on the special bracket
3 Carefully place the two or four sample rings into the two or four sample ring holes on the middle plate respectively.
4 Use tweezers to cover the two or four steel ball petitioner on the two or four sample rings, and place the two or four steel balls in the center of the sample rings.
Note: The preparation and placement of the sample is the key step for the success of the softening point test and the accuracy of the test results. It must be carefully operated in strict accordance with the requirements of the relevant national standards!
5 Put about 700mL of distilled water or glycerin into the beaker, the liquid level is slightly lower than the depth mark on the column.
6. Place the magnetic stir bar in the center of the bottom of the beaker.
7. Gently lift up the upper support with two sample rings, turn it 180°, gently put it back into the beaker, and tighten the fixing nut of the upper support.
8. Insert the temperature sensor wire plug into the socket of the control body.
9 Put the temperature sensor probe into the middle hole of the middle plate of the tester.
10 Plug in the power cord, pay attention to the grounding end of the power cord should be well grounded.

Spare Parts

The  Ring and Ball Test and Softening Point of Bitumen Tester is divided into two parts: the control body and the tester, and the tester is placed on the control body. The tester includes beaker, electric heating tube, temperature sensor, softening point determination positioning ring (steel ball positioning ring) and other components, as well as power lines, heater lines, sensor lines, serial communication lines and other connecting lines. Instruments should be placed in a fume hood.

Our Advantages

With competitive price.
Premium quality with CE & ISO certification.
Strong product OEM & ODM customization capability.
Promise production & on-time delivery.
Perfect after-sales service, free product accessories.
15 years of experience in R&D and production of Softening Point of Bitumen Tester

 

After Sales Service

Service
Device Problem Handling	Social media 24 hours online communication
	Mail Seamless Docking
	Video Conferencing

Contact us

 

If you have any questions about this Ring and Ball Test and Softening Point of Bitumen Tester instrument or the instruction, please contact us in time. We will serve you wholeheartedly!