Vertical Flame Propagation Tester for Single Cable and Wire, IEC 60332

• After-sales Service: All Life Technical Supports
• Warranty: 1 Year
• Product Name: Single Cable Vertical Flame Propagation Tester
• Standard: IEC 60332, En 50086
• Operating Voltage: AC220 V+-10V 50Hz
• Ambient Temperature: Room Temperature ~ 40 ºC
• Model NO.: GD-IEC60332
• Gas Pressure: 0.1MPa
• Gas Purity: Propane> 95%; Compressed Air
• Timing Accuracy: 0.1s
• Size: 600(W)*450(D)*1250(H)mm
• Power: AC 220V, 50/60Hz, 3A
• Weight: 60kg
• Transport Package: Plywood Case
• Trademark: GOLD
• Origin: Chongqing China(Mainland)
• HS Code: 9031809090
• Production Capacity: 500 Sets/ Year

Product Description

Vertical Flame Propagation Tester for Single Cable and Wire, IEC 60332

 

   Introduction:   

Wire and Cable is the second-largest industry. Single wire and cable vertical burning tester is the most widely used and low cost of cable fire performance test equipment. Single wire or cable burning tester meets the national standard GB /T18380.11-2008 / IEC60332-1-1: 2004 requirement. It is to test flame retardant insulation layer under fire conditions applicable for testing wire and cable in overheating, over-current and another non-normal state. It can be used for vertical or fibre optic wire and cable flame spread test, and test combustion conditions of Dettol matter under fire conditions.

   Standard:   

  IEC 60332-1-1,2,3
  EN 50086-1-1994
  GBT 18380.11,12-2008 

   Main features:   

1.  Touch screen intelligent control system; English user interface.

2.  Automatic ignition system, automatic timing, automatic data storage.

3.  The test section and the control section are combined design in one box for operation.

4.  Stainless steel test box, the internal cavity size: height 1200mm, width 300mm, depth of 450mm.

5.  A pre-mixed burner, with an inner diameter of ¢ 12 ± 0.5mm, and a length is 100mm. 1KW hybrid standard burner, which provides an accurate test fire source.

6.  The flame burning applied time and hold time can range from 0 to 99 minutes99 seconds range adjustment. Automatic control of the testing process.

7. The imported needle valve precisely adjusts the flame height, according to standards, the blue flame height is 50mm ~ 60mm, and the total height is 170mm ~ 190mm.

8.  The gas flow rate is controlled by a needle valve.

9.  Equipped with a flame height caliper.

10.  Equipped with a gas flow meter and pressure regulator; automatic ignition.

11.  The torch angle:  45 °, 0 ° adjustable.

12.  The flame calibration device is optional.


Specifications:   

Operating voltage	AC220 V ± 10V 50HZ
Ambient temperature	room temperature ~ 40 ºC
Gas Pressure	0.1MPa
Gas purity	Propane> 95%; compressed air
Timing Accuracy	0.1s
Model	GD-IEC60332
Size	600(W)×450(D)×1250(H)mm
Power	AC 220V, 50/60Hz, 3A
Weight	60kg
Manual	Provide

Our Company:

Since 2008, Chongqing Gold Mechanical & Electrical Equipment Co.,Ltd. has developed 70 kinds of fire testing instruments and served many industries such as building materials, aviation, rails, IMO, wire & cable, safety protection, and so on.

Our mission is to provide reliable products to our customers to meet their requirements of testing, R&D, and quality control. In addition, Gold insists on high-quality standards in niche markets and targets to minimize the gap between Chinese local products and imported products.

We work with trust, honesty, and a sense of responsibility, so the quality and service are always our advantages over all competitors.