Transformer Oil Dissolved Gas Analyzer Gas Chromatograph Detector Dga Analysis

• Customization: Available
• After-sales Service: Life Time Support Service
• Warranty: 1 Year for Transformer Oil Dissolved Gas Analyzer
• Model NO.: GC-7890-DL
• Appliance: Transformer Oil Dissolved Gas Analyzer Dga
• Detector: Tcd/Fid
• Certification: CE, ISO, IEC
• Chromatography Type: Gas Chromatography
• Product Name: Transformer Oil Dissolved Gas Analyzer
• Gas Items: H2, O2, N2, Co, CO2, CH4, C2h4, C2h6, C2h2
• Test Sample: Transformer Oil
• Fid Detection Limit: Mt≤1*10-12g/S
• Tcd Sensitivity: S≥8000mv.Ml/Mg
• Mini Detect Concentration of Hydrogen: ≤2ppm
• Mini Detectable Concentration of Co: ≤1ppm
• Structure: Transformer Oil Dissolved Gas Analyzer
• Detector 1: Thermal Conductivity Detector (Tcd)
• Detector 2: Flame Ionization Detector (Fid)
• Transport Package: Plywood Case
• Specification: 550 (W) * 475 (H) * 460 (D) mm
• Trademark: GOLD
• Origin: Chongqing, China (Mainland)
• HS Code: 9030849000
• Production Capacity: 500 Pieces/Month

Product Description

Transformer Oil Dissolved Gas Analyzer Gas Chromatograph Detector DGA Analysis

About the analysis of dissolved gases in transformer oil: hydrogen (H2), oxygen (O2), nitrogen (N2), carbon monoxide (CO), carbon dioxide (CO2), methane (CH4), ethylene (C2H4), ethane (C2H6), acetylene (C2H2).
 

Introduction

1) Automatic Power Transformer Oil DGA Dissolved Gas Analysis GC Gas Chromatograph is an effective means to achieve gas chromatography. Gas chromatography with a high-performance high selectivity, high sensitivity, rapid analysis, small sample volume, wide range of applications and so on. Chromatography can be widely used systems and scientific research institutes and universities in areas such as health and epidemic prevention, environmental monitoring, quality supervision, petrochemical, pharmaceutical, commodity inspection, public security, food, electricity, liquor, mines and so on.

2) Automatic Power Transformer Oil DGA Dissolved Gas Analysis GC Gas Chromatograph is controlled by a microcomputer, a higher cost performance of the gas chromatograph, can be equipped with a thermal conductivity detector (TCD), flame ionization detector (FID). Can be installed packed column and capillary column oven can be heated and temperature-programmed operations.

 

Main Technical Indicators

• FID Detection limit: Mt≤1×10-12g/s
  TCD Sensitivity: S≥8000mV.ml/mg
  Minimum detectable concentration of hydrocarbons≤0.1PPM
  Minimum detectable concentration of hydrogen≤2PPM
  Minimum detectable concentration of CO≤1PPM
  Minimum detectable concentration of CO2≤5PPM
• New electronic digital circuit, imported precision voltage regulator, imported precision steady flow valve, double column parallel, secondary shunt, one injection full analysis, double packed column inlet, double FID detector, quartz nozzle, TCD detector, Imported antimony tungsten wire, methane reformer, gas shutoff protection, spare parts and kits, etc.

 

Oven

Temperature range: room temperature + 5 ºC ~ 400 ºC (in 1 ° C increments any set)

Temperature accuracy: less than ± 0.1 ºC

Cheng Ascending Order: 7 order

Heating rate: 0.1 ~ 40 ºC / min arbitrarily set (0.1 ° C increments)

Time Setting: 9999.9min

Vaporization Chamber

Temperature range: room temperature plus 6 ºC ~ 400 ºC

Temperature accuracy: less than ± 0.2 ºC

Detector
 

Thermal conductivity detector (TCD)

Temperature range: room temperature plus 6 ºC ~ 400 ºC Temperature accuracy: less than ± 0.1 ºC

Flame ionization detector (FID)

Temperature range: room temperature plus 6 ºC ~ 400 ºC Temperature accuracy: less than ± 0.2 ºC

 

Detector Specifications
Hydrogen flame ionization detector (FID) Sensitivity: Mt≤1 × 10^-12g / s The linear range: ≥10^7 Noise: ≤20uv Drift: ≤150uv / h	Thermal Conductivity Detector (TCD) Sensitivity: S≥8000mv • ml / mg (benzene, H2) Noise: ≤30uv Drift: ≤150uv / h

 

Remark

In order to make the instrument to get the best performance, we recommend the following purity and supply pressure:

•  Carrier gas: (N2, H2, He, Ar) 99.995% 0.35 ~ 0.4MPa
•  Gas: H2 99.995% 0.2 ~ 0.25MPa
•  Dry air: dry without oil 0.35 ~ 0.4MPa    

 

Structure